Forum Flightgear France

Une communauté prend son envol

Vous n'êtes pas identifié(e).

Annonce

Futur nouvel inscrit, tu dois au préalable lire l'intégralité des 10 articles des règles, s'il te plaît. Tout nouveau compte qui ne respecte pas les règles sera supprimé par l'administration.

#1 2/02/2019 22:42:48

f-toro
Administrateur
Lieu : LFLA
Inscription : 16/12/2007
Messages : 3 015

Messages étranges

Bonsoir tout le monde.

Je viens de passer en 2018.4.0 .
Pas mal, beaucoup d'améliorations.

Par contre c'est quoi ces messages bizarres, que j'ai mis en gras dans la cotation, mais qui sont en rouge dans la console ?

andre@debian:~/fgfs$ sh run_fgfs.sh --launcher
    0.00 [INFO]:general    FlightGear:  Version 2018.4.0
    0.00 [INFO]:general    FlightGear:  Build Type Dev
    0.00 [INFO]:general    Built with GNU C++ version 8.2
    0.00 [INFO]:general    Jenkins number/ID 0:none
    0,12 [WARN]:gui        Failed to load default (en) translations
    0.14 [INFO]:navaid     NavCache at:Path "/home/andre/.fgfs/navdata_2018_4.cache"
    0.14 [INFO]:navaid     NavCache read-only flags is:0
    0.14 [INFO]:navaid     NavCache: no main cache rebuild required
    0.14 [INFO]:general    init package root at:Path "/home/andre/.fgfs/Aircraft"
    0.27 [WARN]:gui        can't find principal aircraft  "dhc3W"  for variant: "/home/andre/fgfs/Aircraft/dhc3/dhc3A-set.xml"
    0.27 [WARN]:gui        can't find principal aircraft  "dhc3W"  for variant: "/home/andre/fgfs/Aircraft/dhc3/dhc3F-set.xml"
    0.28 [WARN]:gui        can't find principal aircraft  "Rascal10-JSBsim"  for variant: "/home/andre/fgfs/Aircraft/Rascal/Rascal110-JSBSim-set.xml"
   53.04 [INFO]:input      aircraft = dr400-dauphin
   53.04 [INFO]:general    found aircraft in dir: /home/andre/fgfs/Aircraft/DR400-dauphin
   53.05 [POPU]:aircraft   Aircraft does not specify a minimum FG version: please add one at /sim/minimum-fg-version
   53.05 [INFO]:general    Found language resource for: fr_FR
   53.05 [INFO]:general    Loading XLIFF file at Path "/home/andre/fgfs/install/flightgear/fgdata/Translations/fr/FlightGear-nonQt.xlf"
   53.05 [INFO]:general    Reading localized strings for 'en' from Path "/home/andre/fgfs/install/flightgear/fgdata/Translations/default/sys.xml"
   53.05 [INFO]:general    Reading localized strings for 'en' from Path "/home/andre/fgfs/install/flightgear/fgdata/Translations/default/atc.xml"
   53.05 [INFO]:general    Reading localized strings for 'en' from Path "/home/andre/fgfs/install/flightgear/fgdata/Translations/default/tips.xml"
   53.05 [INFO]:general        option:prop = /nasal/local_weather/enabled=false
   53.05 [INFO]:general        option:metar = XXXX 012345Z 15003KT 19SM FEW072 FEW350 25/07 Q1028 NOSIG
   53.05 [INFO]:general        option:prop = /environment/weather-scenario=Core high pressure region
   53.05 [INFO]:general        option:timeofday = noon
   53.05 [INFO]:general        option:disable-rembrandt =
   53.05 [INFO]:general        option:enable-terrasync =
   53.05 [INFO]:general        option:aircraft-dir = /home/andre/fgfs/Aircraft/DR400-dauphin
   53.05 [INFO]:general        option:aircraft = dr400-dauphin
   53.05 [INFO]:general        option:fg-aircraft = /home/andre/fgfs/Aircraft
   53.05 [INFO]:general        option:airport = LFGK
   53.05 [INFO]:general        option:fg-root = /home/andre/fgfs/install/flightgear/bin/../fgdata/
   53.05 [INFO]:general        option:launcher =
   53.05 [INFO]:general    Using default download dir: Path "/home/andre/.fgfs"
   53.05 [WARN]:general    read-allowed path not found:Path "/home/andre/.fgfs/AI"
   53.05 [WARN]:general    read-allowed path not found:Path "/home/andre/.fgfs/Liveries"
   53.05 [INFO]:general    Using default texture cache directory: Path "/home/andre/.fgfs/TextureCache"
   53.05 [INFO]:general    Using TerraSync dir: Path "/home/andre/.fgfs/TerraSync"
   53.05 [WARN]:general    scenery path not found:Path "/home/andre/fgfs/install/flightgear/fgdata/Scenery"
   53.05 [INFO]:general    EmbeddedResourceManager: selected locale 'fr_FR'
   53.05 [INFO]:opengl     Using stock OSG implementation of GraphicsWindow
StatsHandler::StatsHandler() Setting up GL2 compatible shaders
Now checking for plug-in osgPlugins-3.4.1/osgdb_nvtt.so
   53.05 [INFO]:astro      initializing cloud layers
   53.19 [WARN]:general    Enabling ATI/AMD viewport hack
   53.19 [INFO]:general    Configuration State
   53.19 [INFO]:general    ============= =====
   53.19 [INFO]:general    aircraft-dir = "/home/andre/fgfs/Aircraft/DR400-dauphin"
   53.19 [INFO]:general    fghome-dir = "Path "/home/andre/.fgfs""
   53.19 [INFO]:general    download-dir = "/home/andre/.fgfs"
   53.19 [INFO]:general    terrasync-dir = "/home/andre/.fgfs/TerraSync"
   53.19 [INFO]:general    aircraft-search-paths =
    /home/andre/fgfs/Aircraft
   53.19 [INFO]:general    scenery-search-paths =
    /home/andre/.fgfs/TerraSync
   53.21 [WARN]:io         Image loading failed:Warning: reading "/home/andre/fgfs/Aircraft/DR400-dauphin" not supported.
   53.27 [INFO]:general    NVIDIA Corporation
   53.27 [INFO]:general    GeForce GTX 750 Ti/PCIe/SSE2
   53.27 [INFO]:general    4.4.0 NVIDIA 340.107
   53.27 [INFO]:general    4.40 NVIDIA via Cg compiler
   53.30 [INFO]:view       Splash screen progress loading-aircraft-list
   53.31 [ALRT]:terrasync  Starting automatic scenery download/synchronization to '/home/andre/.fgfs/TerraSync'.
   53.31 [INFO]:view       Splash screen progress loading-nav-dat
   53.32 [INFO]:view       Splash screen progress init-scenery
   53.34 [INFO]:general    General Initialization
   53.34 [INFO]:general    ======= ==============
   53.34 [INFO]:general    FG_ROOT = "Path "/home/andre/fgfs/install/flightgear/fgdata""

   53.34 [INFO]:terrasync  picking entry # 1, server is https://dream.t3r.de/fgscenery
   53.34 [INFO]:terrasync  terrasync scenery provider of the day is 'https://dream.t3r.de/fgscenery'
   53.35 [INFO]:general    Attempting to set starting position from airport code LFGK heading 270
   53.35 [INFO]:event      Reading timezone info from: Path "/home/andre/fgfs/install/flightgear/fgdata/Timezone/zone.tab"
   53.35 [INFO]:terrain    Selected scenery is tilecache
   53.35 [INFO]:terrain    FGStgTerrain::init - init tilemgr
   53.35 [INFO]:terrain    Initializing Tile Manager subsystem.
   53.35 [INFO]:terrain    Initializing the tile cache.
   53.35 [INFO]:terrain      max cache size = 100
   53.35 [INFO]:terrain      current cache size = 0
   53.35 [INFO]:terrain      done with init()
   53.35 [INFO]:view       Splash screen progress finalize-position
   53.36 [INFO]:terrasync  sync of https://dream.t3r.de/fgscenery/Models started, queue size is 26
   53.41 [INFO]:view       Splash screen progress creating-subsystems
   53.41 [INFO]:general    Creating Subsystems
   53.41 [INFO]:general    ======== ==========
   53.41 [INFO]:input      Reading materials from /home/andre/fgfs/install/flightgear/fgdata/Materials/regions/materials.xml
   54.64 [INFO]:systems    Reading systems from Path "/home/andre/fgfs/install/flightgear/fgdata/Aircraft/Generic/generic-systems.xml"
   54.64 [INFO]:cockpit    Initializing HUD Instrument
   54.64 [INFO]:sound      Reading sound sound from Path "/home/andre/fgfs/Aircraft/DR400-dauphin/Sounds/sound.xml"
   54.64 [INFO]:general    Creating subsystems took:1233
   54.64 [INFO]:view       Splash screen progress binding-subsystems

In file /home/andre/fgfs/Aircraft/DR400-dauphin/dr400-dauphin.xml: line 434
<product> only has one argument which makes it a no-op.
Its argument will be evaluated but <product> will not be applied to the result.

In file /home/andre/fgfs/Aircraft/DR400-dauphin/dr400-dauphin.xml: line 458
<product> only has one argument which makes it a no-op.
Its argument will be evaluated but <product> will not be applied to the result.

   55.83 [INFO]:OSG       
   55.83 [WARN]:OSG        PNG lib warning : iCCP: known incorrect sRGB profile
   55.90 [WARN]:OSG        PNG lib warning : iCCP: known incorrect sRGB profile
   56.27 [WARN]:OSG        PNG lib warning : iCCP: known incorrect sRGB profile
   56.40 [WARN]:OSG        PNG lib warning : iCCP: known incorrect sRGB profile
   57.55 [WARN]:OSG        PNG lib warning : iCCP: known incorrect sRGB profile
   57.66 [WARN]:OSG        PNG lib warning : iCCP: known incorrect sRGB profile
   58.35 [ALRT]:nasal      Volcanic activity off.
   63.24 [ALRT]:nasal      Emergency Locator Transmitter (ELT) loaded
   63.24 [ALRT]:nasal      Electrical System ... OK
   72.81 [ALRT]:nasal      Garmin 196 loading cities
   73.66 [ALRT]:nasal      Garmin 196 loading cities done
andre@debian:~/fgfs$

<function name="aero/function/kCDge">
      <description>Change_in_drag_due_to_ground_effect</description>
      <product>    <------------- ligne 434
        <table>
          <independentVar>aero/h_b-mac-ft</independentVar>
          <tableData>
            0.0000   0.0480
            0.1000   0.5150
            0.1500   0.6290
            0.2000   0.7090
            0.3000   0.8150
            0.4000   0.8820
            0.5000   0.9280
            0.6000   0.9620
            0.7000   0.9880
            0.8000   1.0000
            0.9000   1.0000
            1.0000   1.0000
            1.1000   1.0000
          </tableData>
        </table>
      </product>
    </function>

<function name="aero/function/kCLge">
      <description>Change_in_lift_due_to_ground_effect</description>
      <product>   <------- ligne 458
        <table>
          <independentVar>aero/h_b-mac-ft</independentVar>
          <tableData>
            0.0000   1.2030
            0.1000   1.1270
            0.1500   1.0900
            0.2000   1.0730
            0.3000   1.0460
            0.4000   1.0550
            0.5000   1.0190
            0.6000   1.0130
            0.7000   1.0080
            0.8000   1.0060
            0.9000   1.0030
            1.0000   1.0020
            1.1000   1.0000
          </tableData>
        </table>
      </product>
    </function>

Ça ne semble pas très gênant, mais bon...


André. anciennement taureau89_9
Debian Testing Amd64. CM Sabertooth 990FX, FX8350, 32 Go Ram DDR3 1866 Mhz, GTX 1060 6Go, DD 2To Sata 3, THRUSTMASTER T.Flight StickX, FG 2020.4.0 Git.

Hors ligne

#2 3/02/2019 12:01:47

Patten
Membre
Lieu : LFLR
Inscription : 14/12/2010
Messages : 1 757
Site Web

Re : Messages étranges

Bonjour à tous, bonjour André,

J'ai çà aussi avec le Dauphin (depuis quand, j'en sais rien... tongue )
szolec28.png

Par contre, j'ai retrouvé les couleurs dans certains  instruments, elles avaient disparu depuis pas mal de temps.

smile

Dernière modification par Patten (3/02/2019 12:09:00)


Intel I7.7700k 4.2 GHz.CM:MSI Z270 Gaming pro.CG:ASUS GTX 3070 Tuff OC  8Go.Ram:32Go DDR4 GSKILL. 2*SSD 500G 1*M2 500G 1*M2 1T, 2*HDD 2*2T Seagate Baracuda.Alim:Corsair RM750X 80Plus Gold.Ventirad Be quiet pure rock.Boîtier Aérocool GT-S black édition.DVD Asus drw-24f1-mt. Wifi + Bluetooth gigabyte.Dual boot LinuxMint 20.3 Una /Windows10 FG2020.4.0
http://pattenflightgear.wifeo.com/

Hors ligne

#3 3/02/2019 16:38:51

f-toro
Administrateur
Lieu : LFLA
Inscription : 16/12/2007
Messages : 3 015

Re : Messages étranges

Avec le 172p c'est pire.

c172p10.png

Mais ça ne se produit pas avec d'autres avions (j'ai essayé le Citation X, B 777, ...).

Il est donc probable que certains paramètres du code xml de certains avions, peut-être un peu anciens, ne sont plus tout à fait compatibles avec une version récente de FG, je n'avais pas ça auparavant.
En tout cas l'avion reste utilisable.


André. anciennement taureau89_9
Debian Testing Amd64. CM Sabertooth 990FX, FX8350, 32 Go Ram DDR3 1866 Mhz, GTX 1060 6Go, DD 2To Sata 3, THRUSTMASTER T.Flight StickX, FG 2020.4.0 Git.

Hors ligne

#4 3/02/2019 17:43:17

ctesc356
Membre
Inscription : 18/05/2010
Messages : 3 483

Re : Messages étranges

Bonjour,
c'est vrai que la console est devenue bien bavarde, le système de log à été pas mal chamboulé.
Ajout des labels, INFO, WARN etc + autres modifs.
Avant on pouvait sélectionner le degré d'alertes par --log-level et --log-class, maintenant apparemment on a tout, tout le temps.
C'est peut être provisoire pendant le développement, à voir...  tant que ça vole... wink

Dernière modification par ctesc356 (3/02/2019 17:45:32)


Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint

Hors ligne

#5 3/02/2019 19:53:39

Clm76
Membre
Lieu : LFOH - LFOY
Inscription : 22/10/2012
Messages : 1 632

Re : Messages étranges

Bonsoir,

f-toro a écrit :

Mais ça ne se produit pas avec d'autres avions (j'ai essayé le Citation X, B 777, ...).

Ce n'est que les avions jsbsim qui ont le problème. Apparemment il semble que fg ne détecte qu'un seul paramètre lorsqu'il y a le couple : <independentVar> et <tableData>.
Lorsqu'il y a une ou plusieurs <property> en plus, il n'y a pas de problème.

C'est un nouveau contrôle qui a été ajouté dans  "flightgear/src/FDM/JSBSim/math/FGFunction.cpp" (lignes 123 et suivantes)... et qui semble avoir un problème de calcul d'arguments.


Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria -  CPU i3-7020u - Ram 4Go - Intel Graphics 620.

Hors ligne

#6 26/02/2019 12:13:17

dany93
Administrateur
Lieu : Région Parisienne
Inscription : 5/07/2009
Messages : 4 037

Re : Messages étranges

In file /home/dany/FG/Aircraft/DR400-jsbSim/dr400-180-jsbsim.xml: line 405
<product> only has one argument which makes it a no-op.
Its argument will be evaluated but <product> will not be applied to the result.

Il y a vraiment une erreur de principe dans le code, mais auparavant cette erreur était tolérée. Maintenant elle est toujours tolérée (elle ne bloque pas le fonctionnement et ne change pas le résultat) mais elle est signalée. Le contrôle de code est devenu moins tolérant.

DR400-180-JSBSim et DR400-dauphin :

    <function name="aero/function/kCDge">
      <description>Change_in_drag_due_to_ground_effect</description>
      <product>
        <table>
          <independentVar>aero/h_b-mac-ft</independentVar>
          <tableData>
            0.0000   0.0480
            0.1000   0.5150
            ....(lignes sautées)...
            1.1000   1.0000
          </tableData>
        </table>
      </product>
    </function>

A l'intérieur de la balise <product>, il n'y a qu'un seul élément (une <table> ici). Ce qui n'a pas de sens pour un "produit".
Pour se débarrasser de ces messages d'erreur, il faut supprimer ces balises <product>... </product> inutiles.
Il faudra sans doute le faire pour presque tous les avions JSBSim. Cette erreur est commune car de tels fichiers ont été recopiés d'un avion à l'autre.

Une explication possible : l'auteur original avait peut-être réellement mis un "produit" avec une <value> supplémentaire servant pour l'ajustement en développement (<table> * <value>), puis il a supprimé ce facteur devenu inutile après intégration dans la table.


FG 2020.4.0, Linux Mint 20.3, Intel Core i7-11700F @ 2.50GHz, RAM 32 GB DDR4, NVIDIA GeForce RTX 3060 (12 GB)
Boeing 787-8 (YASim, avec nickyivyca, aco)
Hangar avions Patten (PAF) Robin  DR400 JSBSim, Douglas DC3 JSBSim, CAP10B, Tecnam P92 JSBSim.

Hors ligne

Pied de page des forums