Forum Flightgear France

Une communauté prend son envol

Vous n'êtes pas identifié(e).

Annonce

Futur nouvel inscrit, tu dois au préalable lire l'intégralité des 10 articles des règles, s'il te plaît. Tout nouveau compte qui ne respecte pas les règles sera supprimé par l'administration.

#1 9/08/2020 14:06:17

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

[RESOLU]Bug avec le Cirrus SF50

Bonjour,

j'ai essayé de faire un vol hier en Cirrus SF50 mais flightgear s'est fermé tout seul alors j'ai réessayer mon vol mais il s'est fermé tout seul au même endroit de mon vol, a peu près a la moitié donc j'ai pensé que c'était un endroit dans le paysage ou quelques chose du genre qui fait beuguer flightgear et du coup j'ai réessayer un autre vol mais pareil, flightgear s'est fermé a peu près au milieu de mon vol sad, après plus d'une heure de vol mad
Comment regler ce problème ?

Merci d'avance

Amicalement
Mathis

Dernière modification par mat83 (28/08/2020 10:37:16)


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#2 9/08/2020 23:49:09

ctesc356
Membre
Inscription : 18/05/2010
Messages : 3 483

Re : [RESOLU]Bug avec le Cirrus SF50

Bonjour,
éventuellement une saturation de mémoire. Surveilles l'occupation de la ram avec le moniteur système


Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint

Hors ligne

#3 10/08/2020 9:10:42

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

ctesc356 a écrit :

éventuellement une saturation de mémoire

J'ai remarqué que pendant mon vol flightgear était très lent donc c'est sûrement ça. Mais je ne sais pas ce qui pourrai provoquer cette saturation de mémoire. Peut-être l'avion qui est un fichier volumineux mais j'avais déjà fait un vol en SF50 moins long que celui-ci mais ça avait marché, enfin presque parce qu'à la fin de mon vol, un peu avant l'atterrissage, flightgear avait planter. Le problème est peut-être là depuis le début mais je ne l'avais pas remarqué hmm

Amicalement
Mathis


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#4 12/08/2020 15:13:41

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

Je suis aller dans Affichage --> Options d'affichage et j'ai coché Show frame rate. Ça m'a affiché un petit chiffre orange en bas a gauche de l'écran. C'est ça qu'il faut surveiller en vol avec le SF50 ?


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#5 12/08/2020 16:30:25

ctesc356
Membre
Inscription : 18/05/2010
Messages : 3 483

Re : [RESOLU]Bug avec le Cirrus SF50

Dans ubuntu tu as un moniteur de perf graphique: https://doc.ubuntu-fr.org/moniteur_systeme

ou htop, en ligne de commande, qu'il faut installer: https://www.it-connect.fr/visualiser-et … avec-htop/
il permet de surveiller en temps réel les processus qui utilisent de la mémoire et combien.
https://christiansueur.com/htop-visuali … ous-linux/

Tu verras bien si ça cumule et ev arrive au crash.

Dernière modification par ctesc356 (12/08/2020 16:38:37)


Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint

Hors ligne

#6 12/08/2020 17:59:05

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

Je ne pense pas que ce soit ça. J'utilisai environ 75% de la mémoire quand flightgear s'est fermé brusquement. Quand je venais de lancer flightgear, j'utilisai aussi environ 75% de la mémoire. Maintenant, ça m'arrive aussi sur d'autre aéronefs comme sur l'AS350 ou le Bell430 mais c'est assez rare.


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#7 13/08/2020 12:02:18

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

Un peu avant le plantage : djqq.png

Amicalement
Mathis


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#8 13/08/2020 16:48:59

zakharov
Membre historique du forum.
Inscription : 11/09/2005
Messages : 958

Re : [RESOLU]Bug avec le Cirrus SF50

Salut,

ben c'est toujours pareil, sans log sans rien ça aide pas vraiment. Tu n'as rien dans le terminal ? et dans les logs système (/var/log/messages) ?

bons vols
@+
zakh


le zkv1000
Debian Bookworm sur i7-9750H, 16G, NV GeForce GTX 1660 Ti MaxQ 6Go
FG next compilé à la mano
Joystick TM T. Stick X avec fichier de conf perso

Hors ligne

#9 14/08/2020 12:33:21

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

J'ai taper une ligne de commande dans le terminal :

$ dmesg

Et ça ma donner une interminable liste de texte :

mattux@steffux-HP-Compaq-dc7800-Small-Form-Factor:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02
[    0.000000] Linux version 5.4.0-42-generic (buildd@lgw01-amd64-023) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #46~18.04.1-Ubuntu SMP Fri Jul 10 07:21:24 UTC 2020 (Ubuntu 5.4.0-42.46~18.04.1-generic 5.4.44)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=61bc615c-a64a-4f97-91fd-fdbfa3e556b4 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000defafdff] usable
[    0.000000] BIOS-e820: [mem 0x00000000defb1ea0-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq dc7800 Small Form Factor/0AA8h, BIOS 786F1 v01.04 07/18/2007
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2393.864 MHz processor
[    0.004530] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.004532] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.004537] last_pfn = 0x21c000 max_arch_pfn = 0x400000000
[    0.004543] MTRR default type: uncachable
[    0.004544] MTRR fixed ranges enabled:
[    0.004546]   00000-9FFFF write-back
[    0.004547]   A0000-BFFFF uncachable
[    0.004548]   C0000-E3FFF write-protect
[    0.004549]   E4000-EFFFF write-back
[    0.004550]   F0000-FFFFF write-protect
[    0.004551] MTRR variable ranges enabled:
[    0.004553]   0 base 000000000 mask E00000000 write-back
[    0.004554]   1 base 0E0000000 mask FE0000000 uncachable
[    0.004556]   2 base 21C000000 mask FFC000000 uncachable
[    0.004557]   3 base 200000000 mask FE0000000 write-back
[    0.004558]   4 disabled
[    0.004559]   5 disabled
[    0.004559]   6 disabled
[    0.004560]   7 disabled
[    0.005213] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.005342] total RAM covered: 8128M
[    0.005964] Found optimal setting for mtrr clean up
[    0.005966]  gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 0G
[    0.006539] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.006545] last_pfn = 0xdefaf max_arch_pfn = 0x400000000
[    0.016589] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff]
[    0.016799] check: Scanning 1 areas for low memory corruption
[    0.016806] BRK [0xb3801000, 0xb3801fff] PGTABLE
[    0.016809] BRK [0xb3802000, 0xb3802fff] PGTABLE
[    0.016811] BRK [0xb3803000, 0xb3803fff] PGTABLE
[    0.016864] BRK [0xb3804000, 0xb3804fff] PGTABLE
[    0.016866] BRK [0xb3805000, 0xb3805fff] PGTABLE
[    0.016969] BRK [0xb3806000, 0xb3806fff] PGTABLE
[    0.017224] BRK [0xb3807000, 0xb3807fff] PGTABLE
[    0.017248] BRK [0xb3808000, 0xb3808fff] PGTABLE
[    0.017272] BRK [0xb3809000, 0xb3809fff] PGTABLE
[    0.017348] RAMDISK: [mem 0x33227000-0x3590afff]
[    0.017359] ACPI: Early table checksum verification disabled
[    0.017364] ACPI: RSDP 0x00000000000E5C10 000014 (v00 COMPAQ)
[    0.017368] ACPI: RSDT 0x00000000DEFC1E40 000044 (v01 HPQOEM SLIC-BPC 20070718      00000000)
[    0.017376] ACPI: FACP 0x00000000DEFC1EE8 000074 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.017383] ACPI: DSDT 0x00000000DEFC2427 00A1B6 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[    0.017387] ACPI: FACS 0x00000000DEFC1E00 000040
[    0.017390] ACPI: APIC 0x00000000DEFC1F5C 000084 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.017395] ACPI: ASF! 0x00000000DEFC1FE0 000063 (v32 COMPAQ BEARLAKE 00000001      00000000)
[    0.017399] ACPI: MCFG 0x00000000DEFC2043 00003C (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.017403] ACPI: TCPA 0x00000000DEFC207F 000032 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.017407] ACPI: SLIC 0x00000000DEFC20B1 000176 (v01 HPQOEM SLIC-BPC 00000001      00000000)
[    0.017411] ACPI: HPET 0x00000000DEFC2227 000038 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.017415] ACPI: DMAR 0x00000000DEFC225F 000148 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.017427] ACPI: Local APIC address 0xfee00000
[    0.017526] No NUMA configuration found
[    0.017528] Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
[    0.017541] NODE_DATA(0) allocated [mem 0x21bfd1000-0x21bffbfff]
[    0.017883] Zone ranges:
[    0.017884]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.017886]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.017887]   Normal   [mem 0x0000000100000000-0x000000021bffffff]
[    0.017888]   Device   empty
[    0.017890] Movable zone start for each node
[    0.017893] Early memory node ranges
[    0.017894]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.017895]   node   0: [mem 0x0000000000100000-0x00000000defaefff]
[    0.017897]   node   0: [mem 0x0000000100000000-0x000000021bffffff]
[    0.018249] Zeroed struct page in unavailable ranges: 20659 pages
[    0.018250] Initmem setup node 0 [mem 0x0000000000001000-0x000000021bffffff]
[    0.018252] On node 0 totalpages: 2076493
[    0.018253]   DMA zone: 64 pages used for memmap
[    0.018254]   DMA zone: 21 pages reserved
[    0.018255]   DMA zone: 3998 pages, LIFO batch:0
[    0.018348]   DMA32 zone: 14207 pages used for memmap
[    0.018349]   DMA32 zone: 909231 pages, LIFO batch:63
[    0.047971]   Normal zone: 18176 pages used for memmap
[    0.047973]   Normal zone: 1163264 pages, LIFO batch:63
[    0.084785] ACPI: PM-Timer IO Port: 0xf808
[    0.084788] ACPI: Local APIC address 0xfee00000
[    0.084803] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.084804] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.084805] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.084806] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.084820] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.084822] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.084825] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.084826] ACPI: IRQ0 used by override.
[    0.084827] ACPI: IRQ9 used by override.
[    0.084830] Using ACPI (MADT) for SMP configuration information
[    0.084832] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.084841] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.084860] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.084862] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.084863] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[    0.084864] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[    0.084865] PM: Registered nosave memory: [mem 0xdefaf000-0xdefb1fff]
[    0.084866] PM: Registered nosave memory: [mem 0xdefb2000-0xdfffffff]
[    0.084867] PM: Registered nosave memory: [mem 0xe0000000-0xf3ffffff]
[    0.084868] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.084869] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.084869] PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
[    0.084870] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.084871] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[    0.084873] [mem 0xe0000000-0xf3ffffff] available for PCI devices
[    0.084875] Booting paravirtualized kernel on bare hardware
[    0.084880] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.084888] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.085894] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.085902] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.085904] pcpu-alloc: [0] 0 1 2 3 
[    0.085948] Built 1 zonelists, mobility grouping on.  Total pages: 2044025
[    0.085950] Policy zone: Normal
[    0.085953] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=61bc615c-a64a-4f97-91fd-fdbfa3e556b4 ro quiet splash vt.handoff=1
[    0.089322] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.090972] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.091051] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.117767] Calgary: detecting Calgary via BIOS EBDA area
[    0.117769] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.117788] DMAR: [Firmware Bug]: Your BIOS is broken; DMAR reported at address fed92000 returns all ones!
               BIOS vendor: Hewlett-Packard; Ver: 786F1 v01.04; Product Version: 
[    0.192310] Memory: 8022860K/8305972K available (14339K kernel code, 2378K rwdata, 4924K rodata, 2704K init, 5020K bss, 283112K reserved, 0K cma-reserved)
[    0.192323] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
[    0.192583] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.192610] Kernel/User page tables isolation: enabled
[    0.192640] ftrace: allocating 44191 entries in 173 pages
[    0.216443] rcu: Hierarchical RCU implementation.
[    0.216446] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.216447] 	Tasks RCU enabled.
[    0.216448] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.216449] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.220361] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.220628] vt handoff: transparent VT on vt#1
[    0.220638] Console: colour dummy device 80x25
[    0.220645] printk: console [tty0] enabled
[    0.220673] ACPI: Core revision 20190816
[    0.220783] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.220798] APIC: Switch to symmetric I/O mode setup
[    0.220801] DMAR: Host address width 36
[    0.220803] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[    0.220814] DMAR: Failed to map dmar0
[    0.220816] DMAR: Parse DMAR table failure.
[    0.221196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.240800] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22819313687, max_idle_ns: 440795297624 ns
[    0.240805] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.72 BogoMIPS (lpj=9575456)
[    0.240808] pid_max: default: 32768 minimum: 301
[    0.240854] LSM: Security Framework initializing
[    0.240869] Yama: becoming mindful.
[    0.240923] AppArmor: AppArmor initialized
[    0.241009] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.241060] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.241082] *** VALIDATE tmpfs ***
[    0.241306] *** VALIDATE proc ***
[    0.241393] *** VALIDATE cgroup1 ***
[    0.241395] *** VALIDATE cgroup2 ***
[    0.241462] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.241465] process: using mwait in idle threads
[    0.241470] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.241471] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.241474] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.241476] Spectre V2 : Mitigation: Full generic retpoline
[    0.241477] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.241478] Speculative Store Bypass: Vulnerable
[    0.241482] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.241659] Freeing SMP alternatives memory: 40K
[    0.355395] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E4600  @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.355581] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.355588] core: PEBS disabled due to CPU errata
[    0.355590] ... version:                2
[    0.355591] ... bit width:              40
[    0.355592] ... generic registers:      2
[    0.355593] ... value mask:             000000ffffffffff
[    0.355594] ... max period:             000000007fffffff
[    0.355594] ... fixed-purpose events:   3
[    0.355595] ... event mask:             0000000700000003
[    0.355658] rcu: Hierarchical SRCU implementation.
[    0.356801] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.356801] smp: Bringing up secondary CPUs ...
[    0.356801] x86: Booting SMP configuration:
[    0.356801] .... node  #0, CPUs:      #1
[    0.356885] smp: Brought up 1 node, 2 CPUs
[    0.356885] smpboot: Max logical packages: 2
[    0.356885] smpboot: Total of 2 processors activated (9575.45 BogoMIPS)
[    0.358545] devtmpfs: initialized
[    0.358545] x86/mm: Memory block size: 128MB
[    0.360850] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.360933] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.360933] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.360933] pinctrl core: initialized pinctrl subsystem
[    0.361064] PM: RTC time: 06:39:19, date: 2020-08-14
[    0.361221] NET: Registered protocol family 16
[    0.361350] audit: initializing netlink subsys (disabled)
[    0.361359] audit: type=2000 audit(1597387159.140:1): state=initialized audit_enabled=0 res=1
[    0.361359] EISA bus registered
[    0.361359] cpuidle: using governor ladder
[    0.361359] cpuidle: using governor menu
[    0.361359] ACPI: bus type PCI registered
[    0.361359] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.361359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.361359] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.361359] PCI: Using configuration type 1 for base access
[    0.365191] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.368954] ACPI: Added _OSI(Module Device)
[    0.368955] ACPI: Added _OSI(Processor Device)
[    0.368957] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.368958] ACPI: Added _OSI(Processor Aggregator Device)
[    0.368959] ACPI: Added _OSI(Linux-Dell-Video)
[    0.368960] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.368961] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.372810] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.377639] ACPI: Dynamic OEM Table Load:
[    0.377646] ACPI: SSDT 0xFFFF99AF92BECC00 0003AC (v01 COMPAQ CPU_TM2  00000001 MSFT 0100000E)
[    0.378337] ACPI: Dynamic OEM Table Load:
[    0.378342] ACPI: SSDT 0xFFFF99AF92010A00 00017C (v01 COMPAQ CST      00000001 MSFT 0100000E)
[    0.379339] ACPI: Interpreter enabled
[    0.379363] ACPI: (supports S0 S3 S4 S5)
[    0.379365] ACPI: Using IOAPIC for interrupt routing
[    0.379398] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.380801] ACPI: Enabled 11 GPEs in block 00 to 3F
[    0.393456] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.393464] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.393470] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20190816/nsarguments-164)
[    0.393564] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20190816/dsfield-183)
[    0.393571] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20190816/dswload2-478)
[    0.393576] 
               Initialized Local Variables for Method [_OSC]:
[    0.393577]   Local0: (____ptrval____) <Obj>           Integer 0000000000000001
[    0.393581]   Local1: (____ptrval____) <Obj>           Integer 0000000000000005
[    0.393585] Initialized Arguments for Method [_OSC]:  (5 arguments defined for method invocation)
[    0.393586]   Arg0:   (____ptrval____) <Obj>           Buffer(16) 5B 4D DB 33 F7 1F 1C 40
[    0.393592]   Arg1:   (____ptrval____) <Obj>           Integer 0000000000000001
[    0.393594]   Arg2:   (____ptrval____) <Obj>           Integer 0000000000000003
[    0.393597]   Arg3:   (____ptrval____) <Obj>           Buffer(12) 01 00 00 00 1F 01 00 00
[    0.393604] ACPI Error: Aborting method \_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20190816/psparse-531)
[    0.393615] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.393631] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.394237] PCI host bridge to bus 0000:00
[    0.394239] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[    0.394241] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.394243] pci_bus 0000:00: root bus resource [io  0x1000-0x2fff window]
[    0.394244] pci_bus 0000:00: root bus resource [io  0x3000-0x6fff window]
[    0.394246] pci_bus 0000:00: root bus resource [io  0x7000-0xafff window]
[    0.394247] pci_bus 0000:00: root bus resource [io  0xb000-0xffff window]
[    0.394249] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.394250] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff window]
[    0.394252] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.394254] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.394267] pci 0000:00:00.0: [8086:29b0] type 00 class 0x060000
[    0.394416] pci 0000:00:01.0: [8086:29b1] type 01 class 0x060400
[    0.394469] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.394612] pci 0000:00:03.0: [8086:29b4] type 00 class 0x078000
[    0.394628] pci 0000:00:03.0: reg 0x10: [mem 0xf0026900-0xf002690f 64bit]
[    0.394675] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.394783] pci 0000:00:03.2: [8086:29b6] type 00 class 0x010185
[    0.394797] pci 0000:00:03.2: reg 0x10: [io  0x2230-0x2237]
[    0.394803] pci 0000:00:03.2: reg 0x14: [io  0x2268-0x226b]
[    0.394809] pci 0000:00:03.2: reg 0x18: [io  0x2238-0x223f]
[    0.394815] pci 0000:00:03.2: reg 0x1c: [io  0x226c-0x226f]
[    0.394821] pci 0000:00:03.2: reg 0x20: [io  0x21e0-0x21ef]
[    0.394953] pci 0000:00:03.3: [8086:29b7] type 00 class 0x070002
[    0.394966] pci 0000:00:03.3: reg 0x10: [io  0x2240-0x2247]
[    0.394973] pci 0000:00:03.3: reg 0x14: [mem 0xf0024000-0xf0024fff]
[    0.395142] pci 0000:00:19.0: [8086:10bd] type 00 class 0x020000
[    0.395161] pci 0000:00:19.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[    0.395169] pci 0000:00:19.0: reg 0x14: [mem 0xf0025000-0xf0025fff]
[    0.395177] pci 0000:00:19.0: reg 0x18: [io  0x2100-0x211f]
[    0.395237] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.395372] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.395416] pci 0000:00:1a.0: reg 0x20: [io  0x2120-0x213f]
[    0.395584] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.395628] pci 0000:00:1a.1: reg 0x20: [io  0x2140-0x215f]
[    0.395804] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.395848] pci 0000:00:1a.2: reg 0x20: [io  0x2160-0x217f]
[    0.396019] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.396041] pci 0000:00:1a.7: reg 0x10: [mem 0xf0026000-0xf00263ff]
[    0.396125] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.396263] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.396347] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.396490] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.396574] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.396724] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.396768] pci 0000:00:1d.0: reg 0x20: [io  0x2180-0x219f]
[    0.396936] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.396980] pci 0000:00:1d.1: reg 0x20: [io  0x21a0-0x21bf]
[    0.397156] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.397178] pci 0000:00:1d.7: reg 0x10: [mem 0xf0026400-0xf00267ff]
[    0.397262] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.397399] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.397594] pci 0000:00:1f.0: [8086:2914] type 00 class 0x060100
[    0.397676] pci 0000:00:1f.0: quirk: [io  0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
[    0.397681] pci 0000:00:1f.0: quirk: [io  0xfa00-0xfa3f] claimed by ICH6 GPIO
[    0.397684] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[    0.397687] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[    0.397690] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[    0.397841] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018a
[    0.397857] pci 0000:00:1f.2: reg 0x10: [io  0x2248-0x224f]
[    0.397865] pci 0000:00:1f.2: reg 0x14: [io  0x2270-0x2273]
[    0.397872] pci 0000:00:1f.2: reg 0x18: [io  0x2250-0x2257]
[    0.397879] pci 0000:00:1f.2: reg 0x1c: [io  0x2274-0x2277]
[    0.397887] pci 0000:00:1f.2: reg 0x20: [io  0x21f0-0x21ff]
[    0.397894] pci 0000:00:1f.2: reg 0x24: [io  0x2200-0x220f]
[    0.397904] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.397905] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.397907] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.397909] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.398063] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.398080] pci 0000:00:1f.5: reg 0x10: [io  0x2258-0x225f]
[    0.398087] pci 0000:00:1f.5: reg 0x14: [io  0x2278-0x227b]
[    0.398095] pci 0000:00:1f.5: reg 0x18: [io  0x2260-0x2267]
[    0.398102] pci 0000:00:1f.5: reg 0x1c: [io  0x227c-0x227f]
[    0.398109] pci 0000:00:1f.5: reg 0x20: [io  0x2210-0x221f]
[    0.398117] pci 0000:00:1f.5: reg 0x24: [io  0x2220-0x222f]
[    0.398305] pci 0000:01:00.0: [1002:954f] type 00 class 0x030000
[    0.398325] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.398335] pci 0000:01:00.0: reg 0x18: [mem 0xf0100000-0xf010ffff 64bit]
[    0.398343] pci 0000:01:00.0: reg 0x20: [io  0x1100-0x11ff]
[    0.398355] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.398397] pci 0000:01:00.0: supports D1 D2
[    0.398481] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[    0.398500] pci 0000:01:00.1: reg 0x10: [mem 0xf0110000-0xf0113fff 64bit]
[    0.398534] pci 0000:01:00.1: enabling Extended Tags
[    0.398572] pci 0000:01:00.1: supports D1 D2
[    0.398636] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[    0.398656] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.398658] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.398661] pci 0000:00:01.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.398665] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.398725] pci 0000:00:1c.0: PCI bridge to [bus 20]
[    0.398792] pci 0000:00:1c.1: PCI bridge to [bus 30]
[    0.398816] pci_bus 0000:07: extended config space not accessible
[    0.398875] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.398883] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[    0.398885] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.398887] pci 0000:00:1e.0:   bridge window [io  0x1000-0x2fff window] (subtractive decode)
[    0.398888] pci 0000:00:1e.0:   bridge window [io  0x3000-0x6fff window] (subtractive decode)
[    0.398890] pci 0000:00:1e.0:   bridge window [io  0x7000-0xafff window] (subtractive decode)
[    0.398892] pci 0000:00:1e.0:   bridge window [io  0xb000-0xffff window] (subtractive decode)
[    0.398893] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.398895] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf3ffffff window] (subtractive decode)
[    0.398897] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.399674] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.399783] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.399888] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.399993] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.400097] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.400201] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[    0.400306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.400409] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.400876] iommu: Default domain type: Translated 
[    0.401124] SCSI subsystem initialized
[    0.401139] libata version 3.00 loaded.
[    0.401139] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.401139] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.401139] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.401139] vgaarb: loaded
[    0.401139] ACPI: bus type USB registered
[    0.401139] usbcore: registered new interface driver usbfs
[    0.401139] usbcore: registered new interface driver hub
[    0.401139] usbcore: registered new device driver usb
[    0.401139] pps_core: LinuxPPS API ver. 1 registered
[    0.401139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.401139] PTP clock support registered
[    0.401139] EDAC MC: Ver: 3.0.0
[    0.401211] PCI: Using ACPI for IRQ routing
[    0.404896] PCI: pci_cache_line_size set to 64 bytes
[    0.404949] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.404950] e820: reserve RAM buffer [mem 0xdefafe00-0xdfffffff]
[    0.405096] NetLabel: Initializing
[    0.405097] NetLabel:  domain hash size = 128
[    0.405098] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.405131] NetLabel:  unlabeled traffic allowed by default
[    0.405153] hpet: 4 channels of 0 reserved for per-cpu timers
[    0.405153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.405153] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.406988] clocksource: Switched to clocksource tsc-early
[    0.426953] *** VALIDATE bpf ***
[    0.427107] VFS: Disk quotas dquot_6.6.0
[    0.427133] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.427172] *** VALIDATE ramfs ***
[    0.427176] *** VALIDATE hugetlbfs ***
[    0.427313] AppArmor: AppArmor Filesystem Enabled
[    0.427359] pnp: PnP ACPI init
[    0.427484] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.427524] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[    0.427560] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.427998] pnp 00:03: [dma 3]
[    0.428070] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.428447] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.428724] pnp 00:05: [dma 2]
[    0.428763] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.428824] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.429181] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.429212] pnp 00:08: disabling [io  0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.429214] pnp 00:08: disabling [io  0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.429217] pnp 00:08: disabling [io  0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.429219] pnp 00:08: disabling [io  0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.429260] system 00:08: [io  0x0400-0x041f] has been reserved
[    0.429262] system 00:08: [io  0x0420-0x043f] has been reserved
[    0.429264] system 00:08: [io  0x0440-0x045f] has been reserved
[    0.429266] system 00:08: [io  0x0460-0x047f] has been reserved
[    0.429268] system 00:08: [io  0x0480-0x048f] has been reserved
[    0.429270] system 00:08: [io  0xfa00-0xfa3f] has been reserved
[    0.429272] system 00:08: [io  0xfc00-0xfc7f] has been reserved
[    0.429274] system 00:08: [io  0xfc80-0xfcff] has been reserved
[    0.429276] system 00:08: [io  0xfe00-0xfe7f] has been reserved
[    0.429278] system 00:08: [io  0xfe80-0xfeff] has been reserved
[    0.429283] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.429352] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.429358] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.429929] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.429931] system 00:0a: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.429933] system 00:0a: [mem 0x000e4000-0x000fffff] could not be reserved
[    0.429935] system 00:0a: [mem 0xfec01000-0xfecfffff] has been reserved
[    0.429937] system 00:0a: [mem 0xfed00400-0xfed3ffff] has been reserved
[    0.429939] system 00:0a: [mem 0xfed45000-0xffffffff] has been reserved
[    0.429941] system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.429943] system 00:0a: [mem 0x000d2000-0x000e3fff] has been reserved
[    0.429948] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.429961] pnp: PnP ACPI: found 11 devices
[    0.432217] thermal_sys: Registered thermal governor 'fair_share'
[    0.432218] thermal_sys: Registered thermal governor 'bang_bang'
[    0.432220] thermal_sys: Registered thermal governor 'step_wise'
[    0.432221] thermal_sys: Registered thermal governor 'user_space'
[    0.432222] thermal_sys: Registered thermal governor 'power_allocator'
[    0.436723] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.436770] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 20] add_size 1000
[    0.436773] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000
[    0.436775] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000 add_align 100000
[    0.436778] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 30] add_size 1000
[    0.436780] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 add_align 100000
[    0.436782] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 add_align 100000
[    0.436791] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[    0.436797] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.436799] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[    0.436804] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.436807] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.436810] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.436814] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0120000-0xf013ffff pref]
[    0.436817] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.436820] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.436823] pci 0000:00:01.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.436826] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.436830] pci 0000:00:1c.0: PCI bridge to [bus 20]
[    0.436833] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.436837] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    0.436840] pci 0000:00:1c.0:   bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.436845] pci 0000:00:1c.1: PCI bridge to [bus 30]
[    0.436847] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.436851] pci 0000:00:1c.1:   bridge window [mem 0xf8400000-0xf85fffff]
[    0.436855] pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.436860] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.436870] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window]
[    0.436872] pci_bus 0000:00: resource 5 [io  0x0000-0x0cf7 window]
[    0.436873] pci_bus 0000:00: resource 6 [io  0x1000-0x2fff window]
[    0.436875] pci_bus 0000:00: resource 7 [io  0x3000-0x6fff window]
[    0.436876] pci_bus 0000:00: resource 8 [io  0x7000-0xafff window]
[    0.436878] pci_bus 0000:00: resource 9 [io  0xb000-0xffff window]
[    0.436879] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.436881] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff window]
[    0.436883] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window]
[    0.436884] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.436886] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.436887] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.436889] pci_bus 0000:20: resource 0 [io  0x3000-0x3fff]
[    0.436891] pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff]
[    0.436892] pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.436894] pci_bus 0000:30: resource 0 [io  0x4000-0x4fff]
[    0.436895] pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff]
[    0.436897] pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.436899] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff window]
[    0.436901] pci_bus 0000:07: resource 5 [io  0x0000-0x0cf7 window]
[    0.436902] pci_bus 0000:07: resource 6 [io  0x1000-0x2fff window]
[    0.436904] pci_bus 0000:07: resource 7 [io  0x3000-0x6fff window]
[    0.436905] pci_bus 0000:07: resource 8 [io  0x7000-0xafff window]
[    0.436906] pci_bus 0000:07: resource 9 [io  0xb000-0xffff window]
[    0.436908] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.436910] pci_bus 0000:07: resource 11 [mem 0xe0000000-0xf3ffffff window]
[    0.436911] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff window]
[    0.437026] NET: Registered protocol family 2
[    0.437304] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.437473] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.437862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.438011] TCP: Hash tables configured (established 65536 bind 65536)
[    0.438133] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.438200] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.438315] NET: Registered protocol family 1
[    0.438324] NET: Registered protocol family 44
[    0.441084] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.441098] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.441117] PCI: CLS 64 bytes, default 64
[    0.441256] Trying to unpack rootfs image as initramfs...
[    1.141768] Freeing initrd memory: 39824K
[    1.141802] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.141804] software IO TLB: mapped [mem 0xdafaf000-0xdefaf000] (64MB)
[    1.142028] check: Scanning for low memory corruption every 60 seconds
[    1.142599] Initialise system trusted keyrings
[    1.142614] Key type blacklist registered
[    1.142715] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.145008] zbud: loaded
[    1.145556] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.145808] fuse: init (API version 7.31)
[    1.145834] *** VALIDATE fuse ***
[    1.145836] *** VALIDATE fuse ***
[    1.145975] Platform Keyring initialized
[    1.151497] Key type asymmetric registered
[    1.151499] Asymmetric key parser 'x509' registered
[    1.151517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.151585] io scheduler mq-deadline registered
[    1.152539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.152637] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    1.152638] vesafb: scrolling: redraw
[    1.152639] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.152655] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
[    1.152735] fbcon: Deferring console take-over
[    1.152736] fb0: VESA VGA frame buffer device
[    1.152753] intel_idle: does not run on family 6 model 15
[    1.152880] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.152934] ACPI: Power Button [PBTN]
[    1.152980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.153015] ACPI: Power Button [PWRF]
[    1.153067] tsc: Marking TSC unstable due to TSC halts in idle
[    1.153157] clocksource: Switched to clocksource hpet
[    1.153498] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.174027] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.196735] 0000:00:03.3: ttyS4 at I/O 0x2240 (irq = 17, base_baud = 115200) is a 16550A
[    1.197126] Linux agpgart interface v0.103
[    1.200497] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
[    1.204555] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[    1.208508] tpm tpm0: Adjusting TPM timeout parameters.
[    1.398856] random: fast init done
[    1.958884] tpm tpm0: TPM is disabled/deactivated (0x7)
[    1.967074] loop: module loaded
[    1.967326] ata_piix 0000:00:1f.2: version 2.13
[    1.967587] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    2.125466] scsi host0: ata_piix
[    2.125649] scsi host1: ata_piix
[    2.125705] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x21f0 irq 14
[    2.125709] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x21f8 irq 15
[    2.125951] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    2.285201] scsi host2: ata_piix
[    2.285351] scsi host3: ata_piix
[    2.285405] ata3: SATA max UDMA/133 cmd 0x2258 ctl 0x2278 bmdma 0x2210 irq 18
[    2.285407] ata4: SATA max UDMA/133 cmd 0x2260 ctl 0x227c bmdma 0x2218 irq 18
[    2.286013] scsi host4: ata_generic
[    2.286152] scsi host5: ata_generic
[    2.286201] ata5: PATA max UDMA/100 cmd 0x2230 ctl 0x2268 bmdma 0x21e0 irq 18
[    2.286202] ata6: PATA max UDMA/100 cmd 0x2238 ctl 0x226c bmdma 0x21e8 irq 18
[    2.286311] libphy: Fixed MDIO Bus: probed
[    2.286312] tun: Universal TUN/TAP device driver, 1.6
[    2.286384] PPP generic driver version 2.4.2
[    2.286483] VFIO - User Level meta-driver version: 0.3
[    2.286566] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.286578] ehci-pci: EHCI PCI platform driver
[    2.286841] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.286849] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.286861] ehci-pci 0000:00:1a.7: debug port 1
[    2.290769] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.290784] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0026000
[    2.304846] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.304945] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.304949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.304953] usb usb1: Product: EHCI Host Controller
[    2.304956] usb usb1: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    2.304959] usb usb1: SerialNumber: 0000:00:1a.7
[    2.305116] hub 1-0:1.0: USB hub found
[    2.305124] hub 1-0:1.0: 6 ports detected
[    2.305575] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.305581] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.305591] ehci-pci 0000:00:1d.7: debug port 1
[    2.309507] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.309521] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0026400
[    2.328847] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.328951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.328955] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.328958] usb usb2: Product: EHCI Host Controller
[    2.328961] usb usb2: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    2.328970] usb usb2: SerialNumber: 0000:00:1d.7
[    2.329089] hub 2-0:1.0: USB hub found
[    2.329097] hub 2-0:1.0: 4 ports detected
[    2.329282] ehci-platform: EHCI generic platform driver
[    2.329299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.329302] ohci-pci: OHCI PCI platform driver
[    2.329315] ohci-platform: OHCI generic platform driver
[    2.329330] uhci_hcd: USB Universal Host Controller Interface driver
[    2.329550] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.329556] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.329562] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.329579] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120
[    2.329634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.329636] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.329638] usb usb3: Product: UHCI Host Controller
[    2.329640] usb usb3: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    2.329641] usb usb3: SerialNumber: 0000:00:1a.0
[    2.329761] hub 3-0:1.0: USB hub found
[    2.329769] hub 3-0:1.0: 2 ports detected
[    2.330089] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.330097] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.330103] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.330128] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140
[    2.330186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.330188] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.330189] usb usb4: Product: UHCI Host Controller
[    2.330191] usb usb4: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    2.330192] usb usb4: SerialNumber: 0000:00:1a.1
[    2.330304] hub 4-0:1.0: USB hub found
[    2.330312] hub 4-0:1.0: 2 ports detected
[    2.330637] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.330643] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    2.330649] uhci_hcd 0000:00:1a.2: detected 2 ports
[    2.330666] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00002160
[    2.330719] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.330721] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.330723] usb usb5: Product: UHCI Host Controller
[    2.330724] usb usb5: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    2.330726] usb usb5: SerialNumber: 0000:00:1a.2
[    2.330834] hub 5-0:1.0: USB hub found
[    2.330841] hub 5-0:1.0: 2 ports detected
[    2.331158] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.331163] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.331169] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.331186] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002180
[    2.331251] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.331253] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.331254] usb usb6: Product: UHCI Host Controller
[    2.331256] usb usb6: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    2.331257] usb usb6: SerialNumber: 0000:00:1d.0
[    2.331366] hub 6-0:1.0: USB hub found
[    2.331374] hub 6-0:1.0: 2 ports detected
[    2.331696] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.331702] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    2.331707] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.331724] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000021a0
[    2.331781] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.331782] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.331784] usb usb7: Product: UHCI Host Controller
[    2.331786] usb usb7: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    2.331787] usb usb7: SerialNumber: 0000:00:1d.1
[    2.331896] hub 7-0:1.0: USB hub found
[    2.331903] hub 7-0:1.0: 2 ports detected
[    2.332104] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    2.335244] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.335249] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.335402] mousedev: PS/2 mouse device common for all mice
[    2.335586] rtc_cmos 00:00: RTC can wake from S4
[    2.335782] rtc_cmos 00:00: registered as rtc0
[    2.335803] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.335813] i2c /dev entries driver
[    2.335881] device-mapper: uevent: version 1.0.3
[    2.335971] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    2.335999] platform eisa.0: Probing EISA bus 0
[    2.336001] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.336003] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.336005] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.336006] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.336008] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.336009] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.336011] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.336013] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.336014] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.336016] platform eisa.0: EISA: Detected 0 cards
[    2.336020] intel_pstate: CPU model not supported
[    2.336049] ledtrig-cpu: registered to indicate activity on CPUs
[    2.336140] drop_monitor: Initializing network drop monitor service
[    2.336391] NET: Registered protocol family 10
[    2.344463] Segment Routing with IPv6
[    2.344500] NET: Registered protocol family 17
[    2.344571] Key type dns_resolver registered
[    2.344827] RAS: Correctable Errors collector initialized.
[    2.344879] microcode: sig=0x6fd, pf=0x1, revision=0xa4
[    2.344930] microcode: Microcode Update Driver: v2.2.
[    2.344936] IPI shorthand broadcast: enabled
[    2.345017] registered taskstats version 1
[    2.345032] Loading compiled-in X.509 certificates
[    2.347633] Loaded X.509 cert 'Build time autogenerated kernel key: 48ee52262915d1ee4db3e3222acce2ebb1a0fb65'
[    2.347689] zswap: loaded using pool lzo/zbud
[    2.347814] Key type ._fscrypt registered
[    2.347815] Key type .fscrypt registered
[    2.355320] Key type big_key registered
[    2.355328] Key type trusted registered
[    2.359049] Key type encrypted registered
[    2.359055] AppArmor: AppArmor sha1 policy hashing enabled
[    2.359073] ima: Allocated hash algorithm: sha1
[    2.362770] ima: Error Communicating to TPM chip
[    2.365031] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.365959] ima: Error Communicating to TPM chip
[    2.369659] ima: Error Communicating to TPM chip
[    2.373316] ima: Error Communicating to TPM chip
[    2.376842] ima: Error Communicating to TPM chip
[    2.380541] ima: Error Communicating to TPM chip
[    2.383836] ima: Error Communicating to TPM chip
[    2.387458] ima: Error Communicating to TPM chip
[    2.393595] ima: No architecture policies found
[    2.393628] evm: Initialising EVM extended attributes:
[    2.393631] evm: security.selinux
[    2.393632] evm: security.SMACK64
[    2.393634] evm: security.SMACK64EXEC
[    2.393635] evm: security.SMACK64TRANSMUTE
[    2.393636] evm: security.SMACK64MMAP
[    2.393638] evm: security.apparmor
[    2.393639] evm: security.ima
[    2.393641] evm: security.capability
[    2.393642] evm: HMAC attrs: 0x1
[    2.394141] PM:   Magic number: 0:830:670
[    2.394302] rtc_cmos 00:00: setting system clock to 2020-08-14T06:39:21 UTC (1597387161)
[    2.396428] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    2.609835] ata4: SATA link down (SStatus 0 SControl 300)
[    2.620468] ata3: SATA link down (SStatus 0 SControl 300)
[    2.852840] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    2.908887] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.908902] ata2.01: SATA link down (SStatus 0 SControl 300)
[    2.908914] ata2.01: link offline, clearing class 3 to NONE
[    2.911235] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653F, SI00, max UDMA/100
[    2.912899] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.912912] ata1.01: SATA link down (SStatus 0 SControl 300)
[    2.915279] ata1.00: ATA-8: ST3160318AS, HP11, max UDMA/100
[    2.915289] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.915793] ata2.00: configured for UDMA/100
[    2.919848] ata1.00: configured for UDMA/100
[    2.920013] scsi 0:0:0:0: Direct-Access     ATA      ST3160318AS      HP11 PQ: 0 ANSI: 5
[    2.920239] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.920285] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.920305] sd 0:0:0:0: [sda] Write Protect is off
[    2.920307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.920336] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.921049] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653F  SI00 PQ: 0 ANSI: 5
[    2.939294]  sda: sda1
[    2.939807] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.982833] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.982836] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.983145] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.983232] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.157298] Freeing unused decrypted memory: 2040K
[    3.158698] Freeing unused kernel image memory: 2704K
[    3.158759] Write protecting the kernel read-only data: 22528k
[    3.159989] Freeing unused kernel image memory: 2008K
[    3.160674] Freeing unused kernel image memory: 1220K
[    3.177100] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.177120] x86/mm: Checking user space page tables
[    3.193418] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.193423] Run /init as init process
[    3.210293] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.210465] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.210474] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.277907] usb 3-2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[    3.277910] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.277912] usb 3-2: Product: CSR8510 A10
[    3.369952] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.369955] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.370315] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.378952] FDC 0 is a post-1991 82077
[    3.659000] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:5a:2b:c4:a6
[    3.659003] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.659031] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: 1062FF-0FF
[    3.660219] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    3.772352] fbcon: Taking over console
[    3.772524] Console: switching to colour frame buffer device 160x64
[    3.879222] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.475978] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    5.694406] random: crng init done
[    5.694410] random: 7 urandom warning(s) missed due to ratelimiting
[    6.098168] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.116969] systemd[1]: Detected architecture x86-64.
[    6.166060] systemd[1]: Set hostname to <steffux-HP-Compaq-dc7800-Small-Form-Factor>.
[    9.970809] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.970885] systemd[1]: Reached target Remote File Systems.
[    9.971186] systemd[1]: Created slice System Slice.
[    9.971317] systemd[1]: Listening on Syslog Socket.
[    9.971401] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.971426] systemd[1]: Reached target User and Group Name Lookups.
[    9.971519] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.424012] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.054981] lp: driver loaded but no devices found
[   11.184220] ppdev: user-space parallel port driver
[   11.297521] systemd-journald[310]: Received request to flush runtime journal from PID 1
[   11.323740] parport_pc 00:03: reported by Plug and Play ACPI
[   11.323819] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   11.421030] lp0: using parport0 (interrupt-driven).
[   11.556833] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   23.878117] audit: type=1400 audit(1597387182.980:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=455 comm="apparmor_parser"
[   23.878123] audit: type=1400 audit(1597387182.980:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=455 comm="apparmor_parser"
[   23.878127] audit: type=1400 audit(1597387182.980:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=455 comm="apparmor_parser"
[   23.878130] audit: type=1400 audit(1597387182.980:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=455 comm="apparmor_parser"
[   24.620923] audit: type=1400 audit(1597387183.724:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=454 comm="apparmor_parser"
[   24.620929] audit: type=1400 audit(1597387183.724:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=454 comm="apparmor_parser"
[   24.778972] audit: type=1400 audit(1597387183.880:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=458 comm="apparmor_parser"
[   24.778978] audit: type=1400 audit(1597387183.880:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=458 comm="apparmor_parser"
[   24.778981] audit: type=1400 audit(1597387183.880:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=458 comm="apparmor_parser"
[   24.882072] audit: type=1400 audit(1597387183.984:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=459 comm="apparmor_parser"
[   29.658091] Bluetooth: Core ver 2.22
[   29.658112] NET: Registered protocol family 31
[   29.658114] Bluetooth: HCI device and connection manager initialized
[   29.658120] Bluetooth: HCI socket layer initialized
[   29.658123] Bluetooth: L2CAP socket layer initialized
[   29.658128] Bluetooth: SCO socket layer initialized
[   29.733877] input: HP WMI hotkeys as /devices/virtual/input/input5
[   29.816222] kauditd_printk_skb: 17 callbacks suppressed
[   29.816224] audit: type=1400 audit(1597387188.916:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=520 comm="apparmor_parser"
[   30.010019] coretemp coretemp.0: Using relative temperature scale!
[   30.010048] coretemp coretemp.0: Using relative temperature scale!
[   30.550728] audit: type=1400 audit(1597387189.652:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/9804/usr/lib/snapd/snap-confine" pid=519 comm="apparmor_parser"
[   30.550734] audit: type=1400 audit(1597387189.652:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/9804/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=519 comm="apparmor_parser"
[   31.197958] usbcore: registered new interface driver btusb
[   31.219369] [drm] radeon kernel modesetting enabled.
[   31.219465] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[   31.219467] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0100000 -> 0xf010ffff
[   31.219469] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[   31.219471] fb0: switching to radeondrmfb from VESA VGA
[   31.219588] Console: switching to colour dummy device 80x25
[   31.219646] radeon 0000:01:00.0: vgaarb: deactivate vga console
[   31.219932] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1043:0x02A8 0x00).
[   31.219971] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:0a [mem 0x000d2000-0x000e3fff]
[   31.219977] caller pci_map_rom+0x71/0x1d0 mapping multiple BARs
[   31.220056] ATOM BIOS: 
[   31.220088] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   31.220090] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[   31.220093] [drm] Detected VRAM RAM=512M, BAR=256M
[   31.220094] [drm] RAM width 64bits DDR
[   31.220192] [TTM] Zone  kernel: Available graphics memory: 4035348 KiB
[   31.220193] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[   31.220194] [TTM] Initializing pool allocator
[   31.220199] [TTM] Initializing DMA pool allocator
[   31.220221] [drm] radeon: 512M of VRAM memory ready
[   31.220222] [drm] radeon: 1024M of GTT memory ready.
[   31.220233] [drm] Loading RV710 Microcode
[   31.413216] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   31.660641] intel_powerclamp: No package C-state available
[   31.685162] intel_powerclamp: No package C-state available
[   31.892127] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
[   32.648878] audit: type=1400 audit(1597387191.752:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gimp.gimp" pid=541 comm="apparmor_parser"
[   32.795091] audit: type=1400 audit(1597387191.896:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.darktable.darktable" pid=537 comm="apparmor_parser"
[   33.527792] audit: type=1400 audit(1597387192.628:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gimp.hook.post-refresh" pid=553 comm="apparmor_parser"
[   34.323939] [drm] Internal thermal controller without fan control
[   34.325536] [drm] radeon: dpm initialized
[   34.630817] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   34.651788] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[   34.651839] radeon 0000:01:00.0: WB enabled
[   34.651843] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0000000063f66f5d
[   34.651845] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x000000004837b624
[   34.652286] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0x00000000e1b5ad49
[   34.652288] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   34.652289] [drm] Driver supports precise vblank timestamp query.
[   34.652291] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   34.652348] radeon 0000:01:00.0: radeon: using MSI.
[   34.652375] [drm] radeon: irq initialized.
[   34.693844] audit: type=1400 audit(1597387193.796:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=564 comm="apparmor_parser"
[   34.698583] [drm] ring test on 0 succeeded in 1 usecs
[   34.698589] [drm] ring test on 3 succeeded in 2 usecs
[   34.873246] [drm] ring test on 5 succeeded in 1 usecs
[   34.873251] [drm] UVD initialized successfully.
[   34.873732] [drm] ib test on ring 0 succeeded in 0 usecs
[   34.873752] [drm] ib test on ring 3 succeeded in 0 usecs
[   35.223869] audit: type=1400 audit(1597387194.328:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gimp.hook.install" pid=552 comm="apparmor_parser"
[   35.552874] [drm] ib test on ring 5 succeeded
[   35.553747] [drm] Radeon Display Connectors
[   35.553748] [drm] Connector 0:
[   35.553749] [drm]   VGA-1
[   35.553751] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   35.553751] [drm]   Encoders:
[   35.553752] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   35.553753] [drm] Connector 1:
[   35.553754] [drm]   HDMI-A-1
[   35.553754] [drm]   HPD1
[   35.553756] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   35.553756] [drm]   Encoders:
[   35.553757] [drm]     DFP1: INTERNAL_UNIPHY
[   35.553758] [drm] Connector 2:
[   35.553759] [drm]   DVI-I-1
[   35.553759] [drm]   HPD4
[   35.553761] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[   35.553761] [drm]   Encoders:
[   35.553762] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   35.553763] [drm]     DFP2: INTERNAL_UNIPHY2
[   35.648211] [drm] fb mappable at 0xE034D000
[   35.648213] [drm] vram apper at 0xE0000000
[   35.648214] [drm] size 5242880
[   35.648215] [drm] fb depth is 24
[   35.648215] [drm]    pitch is 5120
[   35.648333] fbcon: radeondrmfb (fb0) is primary device
[   35.648439] Console: switching to colour frame buffer device 160x64
[   35.648477] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   35.660972] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   36.983773] audit: type=1400 audit(1597387196.084:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=567 comm="apparmor_parser"
[   37.102349] audit: type=1400 audit(1597387196.204:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=568 comm="apparmor_parser"
[   37.418869] audit: type=1400 audit(1597387196.520:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.echopath" pid=570 comm="apparmor_parser"
[   38.169170] audit: type=1400 audit(1597387197.272:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.gst-discoverer" pid=571 comm="apparmor_parser"
[   38.717260] audit: type=1400 audit(1597387197.820:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=569 comm="apparmor_parser"
[   39.106643] audit: type=1400 audit(1597387198.208:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.gst-inspect" pid=572 comm="apparmor_parser"
[   39.472514] audit: type=1400 audit(1597387198.576:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.gst-launch" pid=573 comm="apparmor_parser"
[   40.023551] audit: type=1400 audit(1597387199.128:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.gst-play" pid=574 comm="apparmor_parser"
[   40.255671] audit: type=1400 audit(1597387199.360:45): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.gst-typefind" pid=575 comm="apparmor_parser"
[   40.912160] audit: type=1400 audit(1597387200.012:46): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.v4l2src" pid=577 comm="apparmor_parser"
[   40.955571] audit: type=1400 audit(1597387200.056:47): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.uvch264src" pid=576 comm="apparmor_parser"
[   41.405275] audit: type=1400 audit(1597387200.508:48): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.videotestsrc" pid=578 comm="apparmor_parser"
[   41.948449] audit: type=1400 audit(1597387201.048:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=580 comm="apparmor_parser"
[   42.138566] audit: type=1400 audit(1597387201.240:50): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gstreamer.videotestsrc-ball" pid=579 comm="apparmor_parser"
[   42.852931] audit: type=1400 audit(1597387201.956:51): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.darktable" pid=581 comm="apparmor_parser"
[   43.037911] audit: type=1400 audit(1597387202.140:52): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gimp" pid=584 comm="apparmor_parser"
[   43.837233] audit: type=1400 audit(1597387202.940:53): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=592 comm="apparmor_parser"
[   43.871085] audit: type=1400 audit(1597387202.972:54): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=593 comm="apparmor_parser"
[   45.604672] kauditd_printk_skb: 1 callbacks suppressed
[   45.604674] audit: type=1400 audit(1597387204.708:56): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gstreamer" pid=596 comm="apparmor_parser"
[   45.961419] gpio_ich gpio_ich.2.auto: GPIO from 451 to 511
[   46.292466] audit: type=1400 audit(1597387205.396:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-logs" pid=594 comm="apparmor_parser"
[   46.483586] audit: type=1400 audit(1597387205.588:58): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.vlc" pid=605 comm="apparmor_parser"
[   47.712012] audit: type=1400 audit(1597387206.812:59): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.vlc.vlc" pid=642 comm="apparmor_parser"
[   47.984732] audit: type=1400 audit(1597387207.084:60): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=659 comm="apparmor_parser"
[   47.986148] audit: type=1400 audit(1597387207.088:61): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/9804/usr/lib/snapd/snap-confine" pid=658 comm="apparmor_parser"
[   47.986153] audit: type=1400 audit(1597387207.088:62): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/9804/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=658 comm="apparmor_parser"
[   47.989831] audit: type=1400 audit(1597387207.092:63): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.darktable" pid=660 comm="apparmor_parser"
[   47.991941] audit: type=1400 audit(1597387207.092:64): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gimp" pid=661 comm="apparmor_parser"
[   47.995122] audit: type=1400 audit(1597387207.096:65): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=662 comm="apparmor_parser"
[   63.397908] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   63.397909] Bluetooth: BNEP filters: protocol multicast
[   63.397917] Bluetooth: BNEP socket layer initialized
[   80.893704] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   80.893813] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[   80.893852] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 3618.081784] Bluetooth: RFCOMM TTY layer initialized
[ 3618.081793] Bluetooth: RFCOMM socket layer initialized
[ 3618.081801] Bluetooth: RFCOMM ver 1.11
[ 3621.848990] rfkill: input handler disabled
[ 3698.095511] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 3788.339796] perf: interrupt took too long (3135 > 3130), lowering kernel.perf_event_max_sample_rate to 63750
[ 3974.370463] perf: interrupt took too long (3923 > 3918), lowering kernel.perf_event_max_sample_rate to 50750
[ 4372.758855] perf: interrupt took too long (4910 > 4903), lowering kernel.perf_event_max_sample_rate to 40500
[12240.236173] show_signal_msg: 25 callbacks suppressed
[12240.236176] fgfs[12239]: segfault at 0 ip 00007f0bb1872bb5 sp 00007ffd0e505470 error 4 in libcurl-gnutls.so.4.5.0[7f0bb185c000+7a000]
[12240.236191] Code: 00 00 49 8b bc 24 a8 00 00 00 e8 96 b0 01 00 84 c0 0f 84 0e 01 00 00 31 c0 44 39 bb 5c 02 00 00 48 8b 93 c0 07 00 00 0f 94 c0 <83> 3a 01 89 c6 74 4c 49 c7 45 00 00 00 00 00 48 63 c6 49 39 ac 24
mattux@steffux-HP-Compaq-dc7800-Small-Form-Factor:~$ 

Et j'ai repéré une ligne (je n'en ai pas vu d'autre mais peut être qu'il y en a) :

[12240.236176] fgfs[12239]: segfault at 0 ip 00007f0bb1872bb5 sp 00007ffd0e505470 error 4 in libcurl-gnutls.so.4.5.0[7f0bb185c000+7a000]

J'espère que ça peut aider.

PS : j'a trouver la ligne de commande ici

Amicalement
Mathis


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#10 14/08/2020 18:23:05

zakharov
Membre historique du forum.
Inscription : 11/09/2005
Messages : 958

Re : [RESOLU]Bug avec le Cirrus SF50

Salut,

ben bingo, un segfault (ou segmentation fault, ou erreur de segmentation en français) c'est quand le code essaie d'écrire en dehors de la plage mémoire qui lui est allouée. Tu n'y peux rien c'est une erreur dans le programme.

un petit

dmesg | grep fgfs

te permet de filtrer, mais je préfère largement un

grep fgfs /var/log/messages

ça semble arriver lorsque FG fait un appel pour récupérer quelque chose sur le web (libcurl est là pour ça), ça pourrait tout aussi bien être le FG1000 qui équipe l'appareil (ça arriverait pas avec le zkv1000 wink), ou le téléchargement d'une tuile de scène, ou encore le multiplayer pour ce qui me vient en tête.

Il y a possibilité de faire planter FG avec canvas (mais je ne retrouve plus la page de wiki qui en cause) ça viendrait pitête de là, essaie donc de ne pas lancer le FG1000 si c'est possible et vois si ça améliore les choses.

Sinon ça sent bon le rapport de bug à l'auteur de l'appareil d'abord, et aux dev FG ensuite.

@+
zakh


le zkv1000
Debian Bookworm sur i7-9750H, 16G, NV GeForce GTX 1660 Ti MaxQ 6Go
FG next compilé à la mano
Joystick TM T. Stick X avec fichier de conf perso

Hors ligne

#11 15/08/2020 12:44:41

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

zakharov a écrit :

ou le téléchargement d'une tuile de scène

C'est pas ça car je n'utilise pas terasync pour pas remplir mon disque dur et qu'avec tout autre avion le même trajet fonctionnait très bien.

Comment je peut lancer l'avion sans lancer le FG1000 ? Et c'est possible de remplacer le FG1000 par le zkv1000 ou le zkv1000 marche uniquement pour le Da42 zakh (qui est d'ailleurs mon avion préféré wink)

Et est-ce que supprimer l'avion pour le retélécharger marcherait ou ça ne servirai totalement a rien ?

Merci d'avance

Amicalement
Mathis

Dernière modification par mat83 (15/08/2020 12:45:57)


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#12 15/08/2020 14:34:37

ctesc356
Membre
Inscription : 18/05/2010
Messages : 3 483

Re : [RESOLU]Bug avec le Cirrus SF50

mat83 a écrit :

C'est pas ça car je n'utilise pas terasync pour pas remplir mon disque dur et qu'avec tout autre avion le même trajet fonctionnait très bien.

Terrasync ne télécharge que le/les trajets que tu effectues, et ce 1seule fois. Le dossier ts sera probablement moins volumineux que des dossiers scène téléchargés en tuiles de 10°/10°
Et les tuiles sont chargées par fg exactement pareil.

mat83 a écrit :

Et est-ce que supprimer l'avion pour le retélécharger marcherait ou ça ne servirai totalement a rien ?

Essaie mais a mon avis inutile, cherches plutôt l'erreur.
Tu as installé htop?

Le Fg1000 de droite, affiche une carte, ça bouffe en général pas mal de ressources, vois si tu peux l'éteindre ou afficher autre chose.


Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint

Hors ligne

#13 15/08/2020 15:01:47

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

ctesc356 a écrit :

Tu as installé htop?

Je ne crois pas.

ctesc356 a écrit :

Le Fg1000 de droite, affiche une carte, ça bouffe en général pas mal de ressources, vois si tu peux l'éteindre ou afficher autre chose.

Ok, merci.


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#14 16/08/2020 19:19:14

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

Impossible de changer ce qu'affiche l'écran de droite.

J'ai refait un vol mais toujours le même problème sad

Dernière modification par mat83 (16/08/2020 19:51:46)


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#15 17/08/2020 8:49:19

ctesc356
Membre
Inscription : 18/05/2010
Messages : 3 483

Re : [RESOLU]Bug avec le Cirrus SF50

Bonjour,
en effet on ne peut rien y "bouger"...
J'ai un peu sollicité le truc.
Un vol avec un plan dans le "route manager" crash de fg au bout de ~ 1h
Un autre vol en ap sans rm, ça semble durer plus longtemps mais finit en "segfault" aussi.

Quand on voit ce qu'affiche la console comme "WARN" et "ALERT", rien d'étonnant que ça finisse mal.
D'ailleurs le développeur écrit dans le "readme":

Might fly but still in heavy development and some issues are present.
I'm using this plane to learn FG aircraft development

donc... attendre qu'il corrige... mais il n'y a pas touché de 2 ans... ou s'y mettre soi-même...


Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint

Hors ligne

#16 17/08/2020 12:47:49

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

ctesc356 a écrit :

Un vol avec un plan dans le "route manager" crash de fg au bout de ~ 1h
Un autre vol en ap sans rm, ça semble durer plus longtemps mais finit en "segfault" aussi.

Mes longs vols de plusieurs centaines voire milliers de kilomètres je les fais en AP avec le route manager et avec le SF-50 ça crashe au bout d'1 h environ et hier j'ai retenté sur un vol en peu plus court avec AP mais sans le route manager et ça a crashé plus tôt, au bout de 40 minutes environ.

ctesc356 a écrit :

ou s'y mettre soi-même...

Je n'y connait absolument rien (sauf pour faire de liveries pour des avions existants) et je me suis lancé dans la modélisation du Cessna 510 Citation Mustang avec blender. Si jamais ça aboutit a quelques chose, j'aurai bien besoin de votre aide pour pouvoir le faire voler dans flightgear.

Amicalement
Mathis


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#17 17/08/2020 22:47:42

zakharov
Membre historique du forum.
Inscription : 11/09/2005
Messages : 958

Re : [RESOLU]Bug avec le Cirrus SF50

salut,

ctes356 a écrit :

Quand on voit ce qu'affiche la console comme "WARN" et "ALERT", rien d'étonnant que ça finisse mal.

je plussoie, d'autant qu'il me semble que ça déjà été évoqué sur cet appareil.

Planter au bout d'une heure d'utilisation c'est pas terrible mais il reste la solution de prévoir des vols plus courts wink. Si je regarde dans les sources du bousin, il prend un FG1000 qui a été copié dedans, donc sans les corrections qui ont été apportées par la suite (pas regardé s'il y en avait eu remarque).

En tout cas si FG ne te plante pas entre les doigts au bout d'une heure avec aucun autre appareil, c'est qu'il il y a beaucoup de "chance" que ça vienne de ce fameux Cirrus SF-50 choppé en plein développement sur github, même si j'avoue ne pas cerner une origine du problème. Il est temps de changer d'appareil si il n'évolue plus, et que tu ne te sens pas de le faire évoluer smile et surtout ne pas être dur avec les gens qui ont produit le résultat actuel, c'est leur plaisir de le faire mais il n'y a aucune obligation commerciale, juridique ou que-sais-je.

dura lex, sed lex smile

@+
bons vols
zakh


le zkv1000
Debian Bookworm sur i7-9750H, 16G, NV GeForce GTX 1660 Ti MaxQ 6Go
FG next compilé à la mano
Joystick TM T. Stick X avec fichier de conf perso

Hors ligne

#18 17/08/2020 23:19:59

f-toro
Administrateur
Lieu : LFLA
Inscription : 16/12/2007
Messages : 3 015

Re : [RESOLU]Bug avec le Cirrus SF50

zakharov a écrit :

et surtout ne pas être dur avec les gens qui ont produit le résultat actuel, c'est leur plaisir de le faire mais il n'y a aucune obligation commerciale, juridique ou que-sais-je.

C'est clair.

Mais bon mat83 c'est mat83.

Peut-on te demander quel est ton âge, mat83 ?


André. anciennement taureau89_9
Debian Testing Amd64. CM Sabertooth 990FX, FX8350, 32 Go Ram DDR3 1866 Mhz, GTX 1060 6Go, DD 2To Sata 3, THRUSTMASTER T.Flight StickX, FG 2020.4.0 Git.

Hors ligne

#19 18/08/2020 9:40:05

arradoy
Moderateur
Lieu : LFBZ
Inscription : 24/11/2010
Messages : 1 024

Re : [RESOLU]Bug avec le Cirrus SF50

f-toro a écrit :

quel est ton âge?

je proteste neutral


macOS BigSur11.7-RAM16Go-AMD Radeon R9 M295X 4Go-FG 2020.4

Hors ligne

#20 19/08/2020 14:13:58

ctesc356
Membre
Inscription : 18/05/2010
Messages : 3 483

Re : [RESOLU]Bug avec le Cirrus SF50

Bonjour,

mat83 a écrit :

Je n'y connait absolument rien

On a tous passé par là... ça peut être long, mais ça se soigne ... wink

J'ai essayé de carrément retirer l'écran de droite, je n'ai plus le crash de fg au bout d'~ une heure.
Dans "Models/Interior/Panel/panel.xml":

<!-- Right (MFD) Display
  <model>
  <path>Aircraft\Instruments-3d\FG1000\GDU104X\GDU-1045.2.xml</path>
      <offsets>
            <x-m> -1.92438 </x-m>
            <y-m>  0.02522 </y-m>
            <z-m>  0.09942 </z-m>
            <pitch-deg>-15</pitch-deg>
      </offsets>
  </model>
  -->

Dernière modification par ctesc356 (19/08/2020 14:19:31)


Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint

Hors ligne

#21 19/08/2020 19:29:41

zakharov
Membre historique du forum.
Inscription : 11/09/2005
Messages : 958

Re : [RESOLU]Bug avec le Cirrus SF50

Salut,

ctes356 a écrit :

J'ai essayé de carrément retirer l'écran de droite, je n'ai plus le crash de fg au bout d'~ une heure.

ce qui rajoute encore un peu plus de mystère à l'histoire smile

Comment en retirant l'objet 3D et ses animations ça empêcherait FG de planter, alors que tout le fourbis Nasal continue de tourner sans se soucier de la présence de cet objet... ? Étrange autant que bizarre, ou alors y a du code pour vérifier si le modèle est présent (je fais un peu la même dans le zkv1000, en vérifiant la présence de propriété que le modèle crée (lignes 118 à 120)).

On peut plus vérifier il semblerait que le Cirrus a disparu des radars (https://github.com/roblevesque/FG-CIRRUS-SF50/ tombe en 404).

En tout cas tant mieux si supprimer le MFD aide big_smile

@+
bons vols
zakh


le zkv1000
Debian Bookworm sur i7-9750H, 16G, NV GeForce GTX 1660 Ti MaxQ 6Go
FG next compilé à la mano
Joystick TM T. Stick X avec fichier de conf perso

Hors ligne

#22 19/08/2020 20:50:55

f-toro
Administrateur
Lieu : LFLA
Inscription : 16/12/2007
Messages : 3 015

Re : [RESOLU]Bug avec le Cirrus SF50

arradoy a écrit :

je proteste neutral

C'est ton droit, mais il n'empêche que j'aimerais bien connaître la réponse.
Certains forums demandent la date de naissance, pour souhaiter les anniversaires.
C'est le cas de nos amis de la PAF d'ailleurs.
Nous ne l'avons pas fait mais je ne vois pas pourquoi je ne poserais pas la question.

Donc je persiste et signe et réitère la question.


André. anciennement taureau89_9
Debian Testing Amd64. CM Sabertooth 990FX, FX8350, 32 Go Ram DDR3 1866 Mhz, GTX 1060 6Go, DD 2To Sata 3, THRUSTMASTER T.Flight StickX, FG 2020.4.0 Git.

Hors ligne

#23 20/08/2020 12:54:18

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

f-toro a écrit :

Peut-on te demander quel est ton âge, mat83 ?

12 ans big_smile

ctesc356 a écrit :

J'ai essayé de carrément retirer l'écran de droite, je n'ai plus le crash de fg au bout d'~ une heure.
Dans "Models/Interior/Panel/panel.xml":

<!-- Right (MFD) Display
  <model>
  <path>Aircraft\Instruments-3d\FG1000\GDU104X\GDU-1045.2.xml</path>
      <offsets>
            <x-m> -1.92438 </x-m>
            <y-m>  0.02522 </y-m>
            <z-m>  0.09942 </z-m>
            <pitch-deg>-15</pitch-deg>
      </offsets>
  </model>
  -->

Je vais essayer ça !

Dernière modification par mat83 (20/08/2020 12:57:39)


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#24 20/08/2020 13:08:24

mat83
Membre
Lieu : LFMC
Inscription : 13/04/2020
Messages : 250

Re : [RESOLU]Bug avec le Cirrus SF50

Dommage pour l'écran, c'était sympa cet carte : itm0.png
Je pense pas que je vais tester aujourd’hui, je le ferai sûrement demain.

Amicalement
Mathis


Linux (Ubuntu 18.04.4 LTS)  Carte graphique : AMD® Rv710 RAM : 7.7 Gio
FlightGear 2020.1.1
Processeur : Intel® Core™2 Duo CPU E4600 @ 2.40GHz × 2
Callsign : F-NZCL

Hors ligne

#25 20/08/2020 13:52:33

f-toro
Administrateur
Lieu : LFLA
Inscription : 16/12/2007
Messages : 3 015

Re : [RESOLU]Bug avec le Cirrus SF50

mat83 a écrit :
f-toro a écrit :

Peut-on te demander quel est ton âge, mat83 ?

12 ans big_smile

Merci !

Voilà la réponse, pas de quoi s'offusquer.

C'est vraiment remarquable de maîtriser aussi bien à 12 ans.

Et c'est aussi normal qu'il y ait un peu de manque de maturité.


André. anciennement taureau89_9
Debian Testing Amd64. CM Sabertooth 990FX, FX8350, 32 Go Ram DDR3 1866 Mhz, GTX 1060 6Go, DD 2To Sata 3, THRUSTMASTER T.Flight StickX, FG 2020.4.0 Git.

Hors ligne

Pied de page des forums