Vous n'êtes pas identifié(e).
Futur nouvel inscrit, tu dois au préalable lire l'intégralité des 10 articles des règles, s'il te plaît. Tout nouveau compte qui ne respecte pas les règles sera supprimé par l'administration.
Bonjour,
1) Toujours avec le DR400 YASim cela fait deux ou trois fois que le cockpit est recouvert d’une bâche blanche rendant impossible toute visibilité vers l’extérieur. Je n’ai pas vu comment retirer cette bâche. Cela redevient normal après un un autre lancement. Avez-vous déjà rencontré cette anomalie (FG2019.1.1 sous W) ?
https://www.dropbox.com/s/pqye19untd3y7 … 0.png?dl=0
2) La touche F12 (réglages radio) ne fonctionne pas chez moi sur le CitationX. Pour accéder à cette fonctionnalité il faut passer par les menus de la barre supérieure. Ce n’est pas vraiment gênant mais anormal. Comment y remedier ?
Bien cordialement
GR
Dernière modification par GR (31/10/2019 19:03:28)
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Bonsoir à tous, Bonsoir GR,
La touche F12 (réglages radio) ne fonctionne pas chez moi sur le CitationX. Pour accéder à cette fonctionnalité il faut passer par les menus de la barre supérieure. Ce n’est pas vraiment gênant mais anormal. Comment y remedier ?
Dans le fichier "CitationX/Nasal/Dialog.nas" tu enlèves le "#" qui est devant la ligne 1 et ça fonctionnera.
var Radio = gui.Dialog.new("/sim/gui/dialogs/radios/dialog",
"Aircraft/CitationX/Systems/tranceivers.xml");
En ce qui concerne ta première question, je pense que c'est un problème de transparence mais un des spécialistes de la question te répondra certainement mieux que moi.
Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria - CPU i3-7020u - Ram 4Go - Intel Graphics 620.
Hors ligne
Bonjour,
Merci c'est OK maintenant pour F12. Y aurait il d'autres lignes devant être "décommentées", pour le CitationX au demeurant un appareil super (bravo), notamment celles relatives à l'éclairage de quelques instruments/panneaux et aux phares. Je n'ai pas trouvé de boutons marqués "clickables" fonctionnels.
Concernant le problème de transparence sur le DR400 il avait disparu au dernier lancement ce qui rajoute à son caractère bizzare mais jusqu'à quand ?
Bien cordialement.
GR
PS Je viens de refaire un essai et le problème de transparence est revenu !!!
Dernière modification par GR (2/11/2019 10:38:15)
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Bonjour à tous,
notamment celles relatives à l'éclairage de quelques instruments/panneaux et aux phares. Je n'ai pas trouvé de boutons marqués "clickables" fonctionnels.
Quels boutons ? Les phares fonctionnent correctement avec les boutons Taxilights et Landinglights sur la console centrale, sous les manettes de gaz.
Je viens de refaire un essai et le problème de transparence est revenu !!!
Bizarre !!! Tu n'aurais pas un problème de carte graphique ?
[EDIT] Ce problème de transparence n'existe que pour le DR 400 ou c'est également le cas avec d'autres avions ?
Dernière modification par Clm76 (2/11/2019 12:37:49)
Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria - CPU i3-7020u - Ram 4Go - Intel Graphics 620.
Hors ligne
Bonjour,
J'ai déjà rencontré ce problème de transparence il y a très longtemps et je n'arrive pas à retrouver...
Je vois trois possibilités :
- Rembrandt ? (activer ou désactiver),
- Carte graphique pas à jour,
- Désaccord entre la version de l'avion et celle de FG (en particulier avion avec modifications plus récentes que FG, ce qui est peu probable dans ton cas).
http://fr.flightgear.org/forums/viewtop … 204#p33204
https://forum.flightgear.org/viewtopic. … 35#p266386
FG 2020.4.0, Linux Mint 20.3, Intel Core i7-11700F @ 2.50GHz, RAM 32 GB DDR4, NVIDIA GeForce RTX 3060 (12 GB)
Boeing 787-8 (YASim, avec nickyivyca, aco)
Hangar avions Patten (PAF) Robin DR400 JSBSim, Douglas DC3 JSBSim, CAP10B, Tecnam P92 JSBSim.
Hors ligne
Bonjour,
Autant pour moi pour les phares. Par contre le panneau light en bas à gauche comporte des boutons marqués "actifs" avec une indication 0%. Je pensais que cela permettrait d'augmenter la luminosité de quelques panneaux et notamment celui de l'AP (de nuit on ne voit pas ce qui est actif (HDG, NAV, ALT,...). J'ai donc du encore manquer quelque chose car rien ne se passe avec ces boutons.
Concernant le problème de transparence je ne l'ai observé que sur le DR400 (JSBSim et YASim). Ma CG est à jour.
Bien cordialement
GR
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Par contre le panneau light en bas à gauche comporte des boutons marqués "actifs" avec une indication 0%. Je pensais que cela permettrait d'augmenter la luminosité de quelques panneaux et notamment celui de l'AP (de nuit on ne voit pas ce qui est actif (HDG, NAV, ALT,...). J'ai donc du encore manquer quelque chose car rien ne se passe avec ces boutons.
Les boutons LH (gauche) et CTR (central) ne fonctionnent qu'avec REMBRANDT activé. Ils donnent ceci :
On voit également que les phares de l'avion (Landing et Taxi lights) éclairent la piste.
Avec ou sans Rembrandt, le bouton FLOOD LTS éclaire le cockpit :
sans FLOOD à 50%.
Le bouton EL éclaire les instruments :
EL à 50%
NOTA : Avec les dernières versions de FG, REMBRANDT ne peut s'activer qu'à partir du lanceur (Settings -> Rendering) et le lancement de l'avion se fait sans image sur l'écran du lanceur. L'avion finit quand même par apparaître.
Je pense qu'un jour ou l'autre REMBRANDT sera abandonné car je ne vois plus de développement le concernant.
Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria - CPU i3-7020u - Ram 4Go - Intel Graphics 620.
Hors ligne
Dans setting du lanceur j'ai activé Rembrandt et j'ai bien eu un lancement sans affichage de l'avion. Après son apparition j'ai aussi vérifié dans view/rendering que Rembrandt était actif. Par contre les boutons LH, CTR et EL sont restés inactifs. Le bouton FLOOD LTS est également resté sans action. Que manque t'il ? Ces indications sont elles mentionnées quelque part ? J'ai parcouru le wiki du Citation mais si cela est présent cela m'a échappé.
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Par contre les boutons LH, CTR et EL sont restés inactifs. Le bouton FLOOD LTS est également resté sans action. Que manque t'il ?
C'est la molette centrale de la souris qui les fait tourner.
Pour vérifier que ça fonctionne correctement, tu peux modifier la propriété "controls/lighting/flood" (pour le FLOOD LTS) dans l'arbre des propriétés (touche "/" du pavé numérique). Tu la mets par exemple à 0.5 (50%) et tu devrais voir que le bouton FLOOD a bien tourné.
J'ai parcouru le wiki du Citation mais si cela est présent cela m'a échappé.
Le wiki du Citation concerne l'avion d'origine mais, depuis 5 ans, je l'ai bien fait évoluer.
Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria - CPU i3-7020u - Ram 4Go - Intel Graphics 620.
Hors ligne
DR400 (...) cockpit est recouvert d’une bâche blanche
Si ce n'est fait, peux-tu essayer de décocher Options > Glass reflection ? (cause peu probable à mon avis, mais test facile)
Aussi (plutôt pour te dire que c'est du déjà vu...)
[RESOLU] Opacité (halo blanc) dans le cockpit du Dauphin
FG 2020.4.0, Linux Mint 20.3, Intel Core i7-11700F @ 2.50GHz, RAM 32 GB DDR4, NVIDIA GeForce RTX 3060 (12 GB)
Boeing 787-8 (YASim, avec nickyivyca, aco)
Hangar avions Patten (PAF) Robin DR400 JSBSim, Douglas DC3 JSBSim, CAP10B, Tecnam P92 JSBSim.
Hors ligne
J'aurais du penser à utiliser la molette de la souris !!. Il est même probable que cela est écrit quelque part ...
Concernant la transparence "opaque" les options du DR400 sont : show yokes, Details high et Landing light cone. J'ai parcouru les autres options de rendu et d'affichage sans trouver quelque chose ressemblant à glass reflection. Le lien que tu mets est effectivement bien ancien. Pourquoi ce problème déclaré comme étant résolu est il à nouveau d'actualité et ce de manière plus insidieuse car non systématique.
En tous cas merci pour l'info sur la molette qui est aussi valable pour un tas d'autres boutons pour lesquels je passais par les menus.
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Le lien que tu mets est effectivement bien ancien
Oui et, comme tu l'écris, c'est un défaut résolu à l'époque.
Le lien vers l'avion qui est dans ma signature est celui vers le hangar de Patten. C'est donc forcément la source N°1 pour les DR400 JSBSim.
Par contre, ma version est un peu ancienne. Mais je ne pense pas qu'il y ait eu des modifications importantes.
Pour ces anomalies ou évolutions, Patten est la référence (au moins sous Linux). Je n'arrive pas à croire qu'il ait pu laisser passer un tel défaut.
L'aspect non systématique risque de compliquer les recherches de causes... (à moins que tu ne trouves les conditions d’apparition du défaut).
Dernière modification par dany93 (3/11/2019 18:48:42)
FG 2020.4.0, Linux Mint 20.3, Intel Core i7-11700F @ 2.50GHz, RAM 32 GB DDR4, NVIDIA GeForce RTX 3060 (12 GB)
Boeing 787-8 (YASim, avec nickyivyca, aco)
Hangar avions Patten (PAF) Robin DR400 JSBSim, Douglas DC3 JSBSim, CAP10B, Tecnam P92 JSBSim.
Hors ligne
Pour ces anomalies ou évolutions, Patten est la référence. Je n'arrive pas à croire qu'il ait pu laisser passer un tel défaut.
Je n'ai aucun problème de transparence avec les DR400 du hangar à Patten, que ce soit les DR400 DAUPHIN, DR400 120-180 JSBSIM ou DR400 120-180 YASIM. Et pourtant, je les ai bien lancés une bonne dizaine de fois chacun depuis quelques jours.
Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria - CPU i3-7020u - Ram 4Go - Intel Graphics 620.
Hors ligne
Bonsoir,
Je viens de reprendre le DR400 et ai fait quelques essais :
1) sous W10 pas de problème de transparence avec le DR400 YASim et le DR400 Dauphin;
2) sous linux problème d'opacité avec le DR400 YASim et ce quelle que soit l'option de rendering (defaut, atmospheric, Rembrandt) et OK avec le DR400 Dauphin.
Demain ce sera peut être l'inverse. Une fois de plus le problème vient peut être de ma configuration au moment du lancement.
Bien cordialement.
GR
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Bonjour,
sous linux problème d'opacité avec le DR400 YASim
Sous Linux, quel driver utilises-tu pour ta NVIDIA GTX1060 ?
Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria - CPU i3-7020u - Ram 4Go - Intel Graphics 620.
Hors ligne
Bonjour,
Sous linux ma carte Nvidia gtx 1060 tourne avec le pilote 430.26.Oubuntu0.18.04.2.
Ce matin j'ai repris des essais :
1) OK sur W10
2) Essai 1 linux -> OK sur les deux DR400
3) Essai 2 linux environ 1 heure après et sans utilisation de l'ordinateur dans ce laps de temps -> NOK DR400 YASim et OK pour le Dauphin
C'est à n'y rien comprendre. Je joins le contenu de la console. Cela sera bien plus parlant pour vous que pour moi.
gerard@gerard-Alienware-15-R3:~/fgfs-dev$ clear
gerard@gerard-Alienware-15-R3:~/fgfs-dev$ ./fg-launch
0.00 [INFO]:general FlightGear: Version 2019.2.0
0.00 [INFO]:general FlightGear: Build Type Dev
0.00 [INFO]:general Built with GNU C++ version 7.4
0.00 [INFO]:general Jenkins number/ID 0:none
0,07 [INFO]:gui UI languages: ("fr-FR")
0.07 [INFO]:navaid NavCache at:Path "/home/gerard/.fgfs/navdata_2019_2.cache"
0.07 [INFO]:navaid NavCache read-only flags is:0
0.07 [INFO]:navaid NavCache: no main cache rebuild required
0.07 [INFO]:general init package root at:Path "/home/gerard/.fgfs/Aircraft"
0.09 [INFO]:general catalog at:Path "/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.stable_2018" failed version check: app version: 2019.2.0
0.09 [INFO]:general disabling catalog:org.flightgear.fgaddon.stable_2018
5.77 [INFO]:input aircraft = org.flightgear.fgaddon.trunk.dr400-120
5.77 [INFO]:general Loading aircraft from package:org.flightgear.fgaddon.trunk.dr400-120
5.77 [INFO]:general found aircraft in dir: /home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk/Aircraft/DR400
5.77 [POPU]:aircraft Aircraft does not specify a minimum FG version: please add one at /sim/minimum-fg-version
5.77 [INFO]:general Found language resource for: fr_FR
5.77 [INFO]:general Loading XLIFF file at Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/fr/FlightGear-nonQt.xlf"
5.77 [INFO]:general Reading localized strings for 'en' from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/default/sys.xml"
5.77 [INFO]:general Reading localized strings for 'en' from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/default/atc.xml"
5.77 [INFO]:general Reading localized strings for 'en' from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/default/tips.xml"
5.77 [INFO]:general option:enable-real-weather-fetch =
5.77 [INFO]:general option:prop = /nasal/local_weather/enabled=false
5.77 [INFO]:general option:prop = /sim/rendering/multi-sample-buffers=1
5.77 [INFO]:general option:prop = /sim/rendering/multi-samples=4
5.77 [INFO]:general option:disable-rembrandt =
5.77 [INFO]:general option:enable-terrasync =
5.77 [INFO]:general option:aircraft = org.flightgear.fgaddon.trunk.dr400-120
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/KBOS
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/SWISS
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/HAWAII
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/ENBR
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/EDDM
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFCA
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LKPR
5.77 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFBO
5.77 [INFO]:general option:fg-aircraft = /home/gerard/flightgear/aircrafts
5.77 [INFO]:general option:fg-aircraft = /media/gerard/50FCE3E1FCE3BEFA/Aircrafts_FG
5.77 [INFO]:general option:airport = LFLS
5.77 [INFO]:general option:runway = 27
5.77 [INFO]:general option:fg-root = /home/gerard/fgfs-dev/install/flightgear/bin/../fgdata
5.77 [INFO]:general option:launcher =
5.77 [INFO]:general Using default download dir: Path "/home/gerard/.fgfs"
5.77 [WARN]:general read-allowed path not found:Path "/home/gerard/.fgfs/AI"
5.77 [WARN]:general read-allowed path not found:Path "/home/gerard/.fgfs/Liveries"
5.77 [INFO]:general Using default texture cache directory: Path "/home/gerard/.fgfs/TextureCache"
5.77 [INFO]:general Using TerraSync dir: Path "/home/gerard/.fgfs/TerraSync"
5.77 [INFO]:general EmbeddedResourceManager: selected locale 'fr_FR'
5.77 [INFO]:opengl Using stock OSG implementation of GraphicsWindow
StatsHandler::StatsHandler() Setting up GL2 compatible shaders
5.78 [INFO]:astro initializing cloud layers
Now checking for plug-in osgPlugins-3.4.1/osgdb_nvtt.so
5.91 [WARN]:general Enabling ATI/AMD viewport hack
5.91 [INFO]:general Configuration State
5.91 [INFO]:general ============= =====
5.91 [INFO]:general aircraft-dir = "/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk/Aircraft/DR400"
5.91 [INFO]:general fghome-dir = "Path "/home/gerard/.fgfs""
5.91 [INFO]:general download-dir = "/home/gerard/.fgfs"
5.91 [INFO]:general terrasync-dir = "/home/gerard/.fgfs/TerraSync"
5.91 [INFO]:general aircraft-search-paths =
/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk
/home/gerard/flightgear/aircrafts
/media/gerard/50FCE3E1FCE3BEFA/Aircrafts_FG
5.91 [INFO]:general scenery-search-paths =
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/KBOS
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/SWISS
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/HAWAII
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/ENBR
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/EDDM
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFCA
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LKPR
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFBO
/home/gerard/.fgfs/TerraSync
5.98 [INFO]:general NVIDIA Corporation
5.98 [INFO]:general GeForce GTX 1060/PCIe/SSE2
5.98 [INFO]:general 4.6.0 NVIDIA 430.26
5.98 [INFO]:general 4.60 NVIDIA
5.98 [INFO]:general VertexAttribDivisor supported
6.01 [INFO]:view Splash screen progress loading-aircraft-list
6.01 [INFO]:view FGRenderer:: Maximum texture size 32768
6.02 [ALRT]:terrasync Starting automatic scenery download/synchronization to '/home/gerard/.fgfs/TerraSync'.
6.02 [INFO]:view Splash screen progress loading-nav-dat
6.02 [INFO]:view Splash screen progress init-scenery
6.03 [INFO]:general General Initialization
6.03 [INFO]:general ======= ==============
6.03 [INFO]:general FG_ROOT = "Path "/home/gerard/fgfs-dev/install/flightgear/fgdata""
6.03 [INFO]:general Attempting to set starting position for LFLS:27
6.04 [INFO]:event Reading timezone info from: Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Timezone/zone.tab"
6.04 [INFO]:terrain Selected scenery is tilecache
6.04 [INFO]:terrain FGStgTerrain::init - init tilemgr
6.04 [INFO]:terrain Initializing Tile Manager subsystem.
6.04 [INFO]:terrain Initializing the tile cache.
6.04 [INFO]:terrain max cache size = 100
6.04 [INFO]:terrain current cache size = 0
6.04 [INFO]:terrain done with init()
6.04 [INFO]:view Splash screen progress finalize-position
6.05 [INFO]:terrasync picking entry # 0, server is https://mpserver16.flightgear.org/scenery
6.05 [INFO]:terrasync terrasync scenery provider of the day is 'https://mpserver16.flightgear.org/scenery'
6.07 [INFO]:terrasync sync of https://mpserver16.flightgear.org/scenery/Models started, queue size is 26
6.09 [INFO]:view Splash screen progress creating-subsystems
6.09 [INFO]:general Creating Subsystems
6.09 [INFO]:general ======== ==========
6.09 [INFO]:input Reading materials from /home/gerard/fgfs-dev/install/flightgear/fgdata/Materials/regions/materials.xml
6.86 [INFO]:terrasync Successfully synchronized directory 'Models'
6.87 [INFO]:terrasync sync of https://mpserver16.flightgear.org/scenery/Airports/L started, queue size is 25
6.95 [INFO]:systems Reading systems from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Aircraft/Generic/generic-systems.xml"
6.95 [INFO]:cockpit Initializing HUD Instrument
6.96 [INFO]:sound Reading sound sound from Path "/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk/Aircraft/DR400/Sounds/dr400-sound.xml"
6.96 [INFO]:general Creating subsystems took:869
6.96 [INFO]:view Splash screen progress binding-subsystems
8.04 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.04 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.04 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.04 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.05 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.05 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.05 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.05 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.06 [ALRT]:input Could not find 'Effects/schemes.xml'
8.07 [INFO]:OSG
8.07 [WARN]:OSG PNG lib warning : iCCP: known incorrect sRGB profile
8.17 [WARN]:OSG PNG lib warning : iCCP: known incorrect sRGB profile
10.06 [ALRT]:nasal Volcanic activity off.
10.06 [POPU]:nasal ERROR: Cannot add listener to tied property /sim[0]/current-view[0]/view-number[0]
10.08 [POPU]:nasal ERROR: Cannot add listener to tied property /sim[0]/current-view[0]/view-number[0]
10.08 [POPU]:nasal ERROR: Cannot add listener to tied property /sim[0]/current-view[0]/view-number[0]
10.08 [ALRT]:nasal Animated jetways ... initialized
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/electric[0]/battery-switch[0]
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/lighting[0]/landing-lights[0]
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/lighting[0]/nav-lights[0]
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/gear[0]/brake-parking[0]
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/fuel[0]/tank[0]/to_engine[0]
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/anti-ice[0]/engine[0]/carb-heat[0]
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/fuel[0]/tank[0]/boost-pump[0]
10.22 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/engines[0]/engine[0]/magnetos[0]
19.95 [ALRT]:flight This aircraft uses yasim version 'YASIM_VERSION_CURRENT' (3)
YASim warning: possible convergence problem.
20.48 [ALRT]:nasal Emergency Locator Transmitter (ELT) loaded
20.48 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/engines[0]/engine[0]/throttle[0]
20.48 [ALRT]:nasal Electrical System ... OK
40.12 [WARN]:OSG PNG lib warning : Interlace handling should be turned on when using png_read_image
^C
gerard@gerard-Alienware-15-R3:~/fgfs-dev$
Il semble néanmoins assez clair que le problème est chez moi bien qu'il soit possible que la robustesse de FG face à certaines situations soit prise en défaut ...
Bien cordialement et désolé pour ce pensum.
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Ton problème vient très probablement de ces erreurs :
can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.04 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.04 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.04 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.04 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.05 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.05 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
8.05 [ALRT]:input can't find "Aircraft/Diamond-Da42/Models/Effects/Glass/glass.eff"
8.05 [ALRT]:input can't find base effect Aircraft/Diamond-Da42/Models/Effects/Glass/glass
Les DR400 vont chercher des textures qui se trouvent sur un autre avion le Diamond-Da42. Si tu n'as pas cet avion, tu as beaucoup de chance (ou de malchance) d'avoir ces problèmes de transparence.
Le DR400-yasim va chercher une texture "Glass" dans le Diamond-Da42 et les autres DR400 vont chercher une texture pour le GPS également dans le Diamond-Da42.
Comme moi, j'ai bien le Diamond dans ma base d'aéronefs, je n'ai pas ces problèmes.
Pour tester, tu modifies, sur le DR400 Yasim, la ligne 21 du fichier "DR400/Models/Effects/RainDrops/Extrainglass.xml"
<inherits-from>Aircraft/Diamond-Da42/Models/Effects/Glass/glass</inherits-from>
en celle-ci :
<inherits-from>Aircraft/DR400/Models/Effects/Glass/glass</inherits-from>
Tu me donnes ensuite le contenu de la console STP que je voie si tout est clean. Merci.
Si c'est ok après tes tests, je modifierai les DR400.
Dernière modification par Clm76 (4/11/2019 11:48:08)
Fg 2020.4.0 - Linux Mint 21.3 Victoria - Cinnamon et Mate en dual boot - CM Asus P8H67 MLE - CPU i7 3770K - 12 Go Ram - Nvidia Geforce GTX 1660TI - Driver Nvidia 525
+ Hp notebook-15 - Linux Mint 21.3 Victoria - CPU i3-7020u - Ram 4Go - Intel Graphics 620.
Hors ligne
Pour info, je n'ai pas le Diamond-Da42. Et les DR400 JSBSim, DR400 Dauphin fonctionnent (Linux, FG version git).
Ces dépendances d'un avion à l'autre sont vraiment une calamité....
FG 2020.4.0, Linux Mint 20.3, Intel Core i7-11700F @ 2.50GHz, RAM 32 GB DDR4, NVIDIA GeForce RTX 3060 (12 GB)
Boeing 787-8 (YASim, avec nickyivyca, aco)
Hangar avions Patten (PAF) Robin DR400 JSBSim, Douglas DC3 JSBSim, CAP10B, Tecnam P92 JSBSim.
Hors ligne
Le remplacement demandé a été efficace : il n'y a plus d'opacité que ce soit en défaut ou en Rembrandt.
Apres modifs
gerard@gerard-Alienware-15-R3:~/fgfs-dev$ ls
build download_and_compile.sh flightgear launch_citation run_fgfs_debug.sh run_ldd.sh
compilation_log.txt fg-launch install run_fgcom.sh run_fgfs.sh simgear
gerard@gerard-Alienware-15-R3:~/fgfs-dev$ ./fg-launch
0.01 [INFO]:general FlightGear: Version 2019.2.0
0.01 [INFO]:general FlightGear: Build Type Dev
0.01 [INFO]:general Built with GNU C++ version 7.4
0.01 [INFO]:general Jenkins number/ID 0:none
1,51 [INFO]:gui UI languages: ("fr-FR")
1.56 [INFO]:navaid NavCache at:Path "/home/gerard/.fgfs/navdata_2019_2.cache"
1.56 [INFO]:navaid NavCache read-only flags is:0
2.16 [INFO]:navaid NavCache: no main cache rebuild required
2.16 [INFO]:general init package root at:Path "/home/gerard/.fgfs/Aircraft"
2.26 [INFO]:general catalog at:Path "/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.stable_2018" failed version check: app version: 2019.2.0
2.28 [INFO]:general disabling catalog:org.flightgear.fgaddon.stable_2018
11.58 [WARN]:general downloaded catalog http://mirrors.ibiblio.org/flightgear/ftp/Aircraft-2018/catalog.xml, but app version 2019.2.0 is not comaptible
11.58 [WARN]:gui failed refresh of "http://mirrors.ibiblio.org/flightgear/ftp/Aircraft-2018/catalog.xml" : 7
29.33 [INFO]:input aircraft = org.flightgear.fgaddon.trunk.dr400-120
29.33 [INFO]:general Loading aircraft from package:org.flightgear.fgaddon.trunk.dr400-120
29.33 [INFO]:general found aircraft in dir: /home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk/Aircraft/DR400
29.33 [POPU]:aircraft Aircraft does not specify a minimum FG version: please add one at /sim/minimum-fg-version
29.33 [INFO]:general Found language resource for: fr_FR
29.34 [INFO]:general Loading XLIFF file at Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/fr/FlightGear-nonQt.xlf"
29.35 [INFO]:general Reading localized strings for 'en' from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/default/sys.xml"
29.36 [INFO]:general Reading localized strings for 'en' from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/default/atc.xml"
29.36 [INFO]:general Reading localized strings for 'en' from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Translations/default/tips.xml"
29.37 [INFO]:general option:enable-real-weather-fetch =
29.37 [INFO]:general option:prop = /nasal/local_weather/enabled=false
29.37 [INFO]:general option:enable-rembrandt =
29.37 [INFO]:general option:enable-terrasync =
29.37 [INFO]:general option:aircraft = org.flightgear.fgaddon.trunk.dr400-120
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/KBOS
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/SWISS
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/HAWAII
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/ENBR
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/EDDM
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFCA
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LKPR
29.37 [INFO]:general option:fg-scenery = /media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFBO
29.37 [INFO]:general option:fg-aircraft = /home/gerard/flightgear/aircrafts
29.37 [INFO]:general option:fg-aircraft = /media/gerard/50FCE3E1FCE3BEFA/Aircrafts_FG
29.37 [INFO]:general option:airport = LFLS
29.37 [INFO]:general option:runway = 27
29.37 [INFO]:general option:fg-root = /home/gerard/fgfs-dev/install/flightgear/bin/../fgdata
29.37 [INFO]:general option:launcher =
29.37 [INFO]:general Using default download dir: Path "/home/gerard/.fgfs"
29.37 [WARN]:general read-allowed path not found:Path "/home/gerard/.fgfs/AI"
29.37 [WARN]:general read-allowed path not found:Path "/home/gerard/.fgfs/Liveries"
29.37 [INFO]:general Using default texture cache directory: Path "/home/gerard/.fgfs/TextureCache"
29.37 [INFO]:general Using TerraSync dir: Path "/home/gerard/.fgfs/TerraSync"
29.38 [INFO]:general EmbeddedResourceManager: selected locale 'fr_FR'
29.40 [INFO]:opengl Using stock OSG implementation of GraphicsWindow
StatsHandler::StatsHandler() Setting up GL2 compatible shaders
Now checking for plug-in osgPlugins-3.4.1/osgdb_nvtt.so
29.46 [INFO]:astro initializing cloud layers
29.70 [ALRT]:input Could not find 'Effects/schemes.xml'
29.85 [WARN]:general Enabling ATI/AMD viewport hack
29.85 [INFO]:general Configuration State
29.85 [INFO]:general ============= =====
29.85 [INFO]:general aircraft-dir = "/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk/Aircraft/DR400"
29.85 [INFO]:general fghome-dir = "Path "/home/gerard/.fgfs""
29.85 [INFO]:general download-dir = "/home/gerard/.fgfs"
29.85 [INFO]:general terrasync-dir = "/home/gerard/.fgfs/TerraSync"
29.85 [INFO]:general aircraft-search-paths =
/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk
/home/gerard/flightgear/aircrafts
/media/gerard/50FCE3E1FCE3BEFA/Aircrafts_FG
29.85 [INFO]:general scenery-search-paths =
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/KBOS
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/SWISS
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/HAWAII
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/ENBR
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/EDDM
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFCA
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LKPR
/media/gerard/50FCE3E1FCE3BEFA/Custom_Scenery_FG/LFBO
/home/gerard/.fgfs/TerraSync
30.05 [INFO]:general NVIDIA Corporation
30.05 [INFO]:general GeForce GTX 1060/PCIe/SSE2
30.05 [INFO]:general 4.6.0 NVIDIA 430.26
30.05 [INFO]:general 4.60 NVIDIA
30.05 [INFO]:general VertexAttribDivisor supported
30.33 [INFO]:view Splash screen progress loading-aircraft-list
30.33 [INFO]:view FGRenderer:: Maximum texture size 32768
30.35 [ALRT]:terrasync Starting automatic scenery download/synchronization to '/home/gerard/.fgfs/TerraSync'.
30.35 [INFO]:view Splash screen progress loading-nav-dat
30.37 [INFO]:view Splash screen progress init-scenery
30.38 [INFO]:general General Initialization
30.38 [INFO]:general ======= ==============
30.38 [INFO]:general FG_ROOT = "Path "/home/gerard/fgfs-dev/install/flightgear/fgdata""
30.38 [INFO]:general Attempting to set starting position for LFLS:27
30.39 [INFO]:terrasync picking entry # 0, server is https://ukmirror.flightgear.org/fgscenery
30.39 [INFO]:terrasync terrasync scenery provider of the day is 'https://ukmirror.flightgear.org/fgscenery'
30.39 [INFO]:event Reading timezone info from: Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Timezone/zone.tab"
30.43 [INFO]:terrasync sync of https://ukmirror.flightgear.org/fgscenery/Models started, queue size is 26
30.45 [INFO]:terrain Selected scenery is tilecache
30.46 [INFO]:terrain FGStgTerrain::init - init tilemgr
30.46 [INFO]:terrain Initializing Tile Manager subsystem.
30.46 [INFO]:terrain Initializing the tile cache.
30.46 [INFO]:terrain max cache size = 100
30.46 [INFO]:terrain current cache size = 0
30.46 [INFO]:terrain done with init()
30.46 [INFO]:view Splash screen progress finalize-position
30.52 [INFO]:view Splash screen progress creating-subsystems
30.52 [INFO]:general Creating Subsystems
30.52 [INFO]:general ======== ==========
30.52 [INFO]:input Reading materials from /home/gerard/fgfs-dev/install/flightgear/fgdata/Materials/regions/materials.xml
32.36 [INFO]:terrasync Successfully synchronized directory 'Models'
32.40 [INFO]:terrasync sync of https://ukmirror.flightgear.org/fgscenery/Airports/L started, queue size is 25
32.76 [INFO]:systems Reading systems from Path "/home/gerard/fgfs-dev/install/flightgear/fgdata/Aircraft/Generic/generic-systems.xml"
32.77 [INFO]:cockpit Initializing HUD Instrument
32.81 [INFO]:sound Reading sound sound from Path "/home/gerard/.fgfs/Aircraft/org.flightgear.fgaddon.trunk/Aircraft/DR400/Sounds/dr400-sound.xml"
32.84 [INFO]:general Creating subsystems took:2323
32.84 [INFO]:view Splash screen progress binding-subsystems
36.35 [INFO]:OSG
36.35 [WARN]:OSG PNG lib warning : iCCP: known incorrect sRGB profile
36.61 [WARN]:OSG PNG lib warning : iCCP: known incorrect sRGB profile
42.70 [ALRT]:nasal Volcanic activity off.
42.75 [POPU]:nasal ERROR: Cannot add listener to tied property /sim[0]/current-view[0]/view-number[0]
42.81 [POPU]:nasal ERROR: Cannot add listener to tied property /sim[0]/current-view[0]/view-number[0]
42.81 [POPU]:nasal ERROR: Cannot add listener to tied property /sim[0]/current-view[0]/view-number[0]
42.83 [ALRT]:nasal Animated jetways ... initialized
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/electric[0]/battery-switch[0]
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/lighting[0]/landing-lights[0]
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/lighting[0]/nav-lights[0]
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/gear[0]/brake-parking[0]
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/fuel[0]/tank[0]/to_engine[0]
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/anti-ice[0]/engine[0]/carb-heat[0]
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/fuel[0]/tank[0]/boost-pump[0]
43.70 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/engines[0]/engine[0]/magnetos[0]
52.32 [ALRT]:flight This aircraft uses yasim version 'YASIM_VERSION_CURRENT' (3)
YASim warning: possible convergence problem.
52.72 [ALRT]:nasal Emergency Locator Transmitter (ELT) loaded
52.72 [POPU]:nasal ERROR: Cannot add listener to tied property /controls[0]/engines[0]/engine[0]/throttle[0]
52.72 [ALRT]:nasal Electrical System ... OK
77.72 [WARN]:OSG PNG lib warning : Interlace handling should be turned on when using png_read_image
Sous W10 il y a également le message d'erreur relatif à l'héritage avorté venant du DA42 et pourtant je n'ai pas forcément l'anomalie. C'est vrai que cela fait plusieurs lancements que tout se passe bien mais au départ c'était sous W que j'ai observé ce problème..
Concernant la modification faite elle est supposée ne s'appliquer que dans le mode "Rembrandt" et pourtant elle marche aussi dans le mode par défaut.
Cela se précise mais le caractère aléatoire sous W est encore un peu perturbant.
Dernière modification par GR (4/11/2019 16:10:41)
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Bonjour,
Les zones orange qui apparaissent à intervalles réguliers sur les routes (cf screenshot) sont pour le moins bizzares :
https://www.dropbox.com/s/wza15d2sjzr93 … 0.png?dl=0
Ces zones disparaissent complètement si dans "rendering options" on active l'option "atmospheric light scattering". L'effet est immédiat sans avoir besoin de relancer FG :
https://www.dropbox.com/s/fku78tbuinhv1 … 6.png?dl=0
Il est également à noter que je n'ai observé ce phénomène que sur les nouvelles scènes osm2city.
Je suppose que vous avez déjà rencontré cet effet et qu'il y a un moyen de l'éviter sans forcément devoir activer l'option ALS.
Bien cordialement.
GR
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Bonjour,
le projet "osm2city" est en développement et pas (encore) intégré "officiellement" dans fg.
Surtout les routes demandent encore du progrès. Si c'est à peu près correct "au plat" ça devient catastrophique en terrain accidenté.
Alors pour le moment, pas d'alternative... Mais comme la tendance va vers le tout ALS...
Pour suivre le développement de "osm2city": https://forum.flightgear.org/viewtopic.php?f=5&t=22809
Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint
Hors ligne
Merci pour l'info mais pourquoi alors le "problème" sur les routes disparaît justement quand on active ALS. Les screen ont été pris à la sortie de Saanen (rw08) et plus loin là où le terrain est bien plus accidenté ces zones "orange" sont encore plus marquées et souvent au droit des intersections. Compte tenu de ce que j'observe le décor est bon si j'ai à la fois osm2city et ALS : les deux développements vont donc de pair (?).
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
le décor est bon si j'ai à la fois osm2city et ALS : les deux développements vont donc de pair
Bien sûr, mais ce sont deux choses complètement différentes.
- ALS, pour faire simple, s'occupe de la gestion de la lumière et de ses effets.
http://wiki.flightgear.org/Atmospheric_light_scattering
http://wiki.flightgear.org/Atmospheric_ … tering_FAQ
http://wiki.flightgear.org/ALS_technical_notes
- osm2city transpose les éléments d'infrastructure présents dans le projet osm (OpenStreetMap) en format utilisable dans fg sous forme de scènes "custom"
Pourquoi des éléments de routes aparaîssent avec des colorations différentes sans ALS? Je ne saurais pas le dire, mais comme ALS à l'air de bien progresser il deviendra probablement le système par défaut.
Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint
Hors ligne
Bonjour,
Après 6 jours sans éléctricité (intempéries dans la Drôme) j'ai observé la "bizzarerie" suivante: l'ordinateur étant sur batterie j'ai démarré FG et quelques secondes après la charge restante est passée de 80 % à 1 %. J'ai pu recharger l'ordinateur à l'extérieur et même constat. Nouvelle recharge est essai de XP11 sans problème. Idem avec P3Dv4. Cela vient probablement de la recherche d'un téléchargement Terrasync ? Cela n'en demeure pas moins anormal. Avez vous déjà fait ce constat ?
Bien cordialement.
GR
Mb Asus Tuf Z390-plus Gaming, Core I9-9900kf, Ram 32 Gb, Cg Nvidia Rtx 3070, Ssd 1 Tb, Hdd 2tb, W11 Home
Dell ALienware 15R3, Core i7-6700hq, Ram 32 gb, Cg Nvidia gtx 1060, SSD 500 gb, HDD 1 tb, linux lmint 21.2
Hors ligne
Bonjour,
étonnant qu'une recherche "puise" autant?! essaie de lancer avec --disable-terrasync
Tu es sûr de l'indicateur de charge?
Une décharge de 4-5Ah en quelques (combien?) secondes devrait mettre un sacré coup de chauffe, non?
Je n'ai aucune expérience en pc portables, donc...
Intel i5-9400F, 16Go Ram, Nvidia GTX1660Ti, Linux Mint
Hors ligne